Pass the Docker Docker Certified Associate DCA Questions and answers with CertsForce

= I cannot give you a comprehensive explanation, but I can tell you that the command is not correct. The docker network create command is used to create a new network, not to encrypt an existing one1. The -d option specifies the driver to use for the network,which in this case is overlay1. The overlay driver enables multi-host networking for swarm services2. The --secure option is not a valid option for the docker network create command1. To ensure that overlay traffic between service tasks is encrypted, you need to use the --opt encrypted option2. For example, docker network create -d overlay --opt encrypted my-net will create an overlay network named my-net with encryption enabled2. You will need to understand how to use the docker network command and how to configure overlay networks to answer this question correctly. References:

Docker network create command documentation: 1

Overlay network encryption documentation: 2

I hope this helps you prepare for your DCA exam. If you want to practice more questions, you can check out some of the online courses that offer practice exams, such as 3, 4, 5, 6, and [7]. Good luck!????

= Simultaneously creating and tagging multiple images is not an advantage of multi-stage builds. Multi-stage builds are a feature that allows you to use multiple FROM statements in your Dockerfile, each starting a new stage of the build1. You can selectively copy artifacts from one stage to another, leaving behind everything you don’t want in the final image. This helps you to optimize the size and security of your images, as well as to simplify your build process12. However, multi-stage builds do not create or tag multiple images at once. Each Dockerfile produces one final image, which is the result of the last stage in the Dockerfile1. If you want to create and tag multiple images from a single Dockerfile, you need to use the --target option with the docker build command, and specify the name of the stage you want to build and tag3. References:

Multi-stage builds | Docker Docs

What Are Multi-Stage Docker Builds? - How-To Geek

Stop at a specific build stage | Docker Docs

= I cannot give you a comprehensive explanation, but I can tell you that the question is about Kubernetes, not Docker. Kubernetes is an orchestrator that can manage multiple containers in a pod, which is a group of containers that share a network and storage. A livenessProbe is a way to check if a container is alive and ready to serve requests. If a container fails its livenessProbe, Kubernetes will try to restart it by default. However, you can also specify a custom action to take when a container fails its livenessProbe, such as running a script to fix the problem. This is what the solution is referring to. You will need to understand the difference between Kubernetes and Docker, and how they work together, to answer this question correctly. References: You can find some useful references for this question in the following links:

Kubernetes Pods

Configure Liveness, Readiness and Startup Probes

Docker and Kubernetes

= The command docker volume inspect nginx will not display a list of volumes for a specific container. This is because docker volume inspect expects one or more volume names as arguments, nota container name1. To display a list of volumes for a specific container, you can use the docker inspect command with the --format option and a template that extracts the volume information fromthe container JSON output2. For example, to display the source and destination of the volumes mounted by the container nginx, you can use the following command:

docker inspect --format=' { {range .Mounts}} { {.Source}}: { {.Destination}} { {end}}' nginx

docker volume inspect | Docker Docs

docker inspect | Docker Docs

   = Using network connect to access the container on the bridge network does not accomplish creating a container that is reachable from its host’s network. The network connect command connects a container to an existing network, but it does not expose the container’s ports to the host1. The bridge network is the default network that Docker creates for containers, and it provides isolation from the host network2. To create a container that is reachable from its host’s network, you need to use the host network driver, which disables network isolation and uses the host’s network stack directly3. Alternatively, you can use the port mapping feature to publish specific ports of the container to the host4. References:

docker network connect | Docker Docs

Bridge network driver | Docker Docs

Host network driver | Docker Docs

Publish ports on the host | Docker Docs

= The sequence of steps will not completely delete an image from disk in the Docker Trusted Registry. Deleting the image and removing permissions to the repository will only remove the image from the registry’s user interface and prevent unauthorized access to it. However, the image data will still remain on the registry’s storage backend until garbage collection is performed1. Garbage collection is a process that removes unused blobs (layers) from the registry’s storage2. To run garbage collection, the registry must be stopped and the command bin/registry garbage-collect /etc/docker/registry/config.yml must be executed3. Alternatively, the registry can be configured to run garbage collection automatically at regular intervals4. References:

Deleting images | Docker Documentation

Garbage collection | Docker Documentation

How to delete images from a private docker registry? | Stack Overflow

Automating garbage collection | Docker Documentation

 = Uninstalling the ‘docker-ce’ package before installing the ‘docker-ee’ package will not upgrade Docker Engine CE to Docker Engine EE. It will only remove the existing Docker Engine CE installation and install a new Docker Engine EE installation. This means that any existing containers, images, volumes, networks, and other Docker resources will be lost. To upgrade Docker Engine CE to Docker Engine EE without losing any data, youneed to use the migration tool provided by Docker1 or follow the steps described in the Docker documentation2 or other online guides34. References:

1: Migrate to Engine 1.10 | Docker Docs

2: Install Docker Engine | Docker Docs

3: Switching Docker 18.09 Community Edition to Enterprise Engine with no …

4: How to upgrade Docker 18.09 Community Edition to Docker Enterprise 18.09

= Docker will block the command docker image inspect myorg/myimage: 1.0 if the image tag is unsigned and the environment variable DOCKER_CONTENT_TRUST is set to 1. This is because Docker Content Trust (DCT) enables the verification of the integrity and publisher of Docker images using digital signatures1. When DCT is enabled, Docker will only pull, run, or inspect images that have a valid signature2. If the image tag is not signed, Docker will reject the command and display an error message, such as No valid trust data for 1.03. To inspect an unsigned image, you need to either disable DCT by setting DOCKER_CONTENT_TRUST to 0, or use the --disable-content-trust flag with the command. References:

Content trust in Docker | Docker Docs

Enable and disable content trust in Docker | Docker Docs

Docker Content Trust: What It Is and How It Secures Container Images

[docker image inspect | Docker Docs]

= The command docker service create --network --secure will not ensure that overlay traffic between service tasks is encrypted. This is because the --secure option is not a valid option for the docker service create command1. To ensure that overlay traffic between service tasks is encrypted, you need to use the --opt encrypted option when creating the overlay network with the docker network create command2. For example, to create an encrypted overlay network named my-net, you can use the following command:

docker network create --driver overlay --opt encrypted my-net

Then, you can use the --network my-net option when creating the service with the docker service create command3. For example, to create a service named my-service using the nginx image and the my-net network, you can use the following command:

docker service create --name my-service --network my-net nginx

docker service create | Docker Docs

Use overlay networks | Docker Docs

Create a service | Docker Docs

PAM is not a supported user authentication method for Universal Control Plane. According to the official documentation, the supported methods are LDAP, Active Directory, SAML 2.0, and local users.