To install Cascade Shark, the best practice to initially configure the IP Address to be used on the network is:
A.
Connect a cross-over cable from your laptop to the Ethernet management port and connect through the Web browser to the default IP Address of 192.168.1.10.
B.
Connect a cross-over cable from your laptop to the Auxiliary Ethernet port and connect through the Web browser to the default IP Address of 192.168.1.10.
C.
Connect by KVM or Serial Console and run the command line tool, sa_wizard, to perform the initial configuration.
D.
Connect to the appliance using the Riverbed Central Management Console (CMC) on its default IP Address and perform the initial configuration.
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit