The IICRC WRT body of knowledge clearly identifiestimeas one of the most critical variables influencing the extent of damage in a water loss. The longer materials remain wet, the greater the likelihood of primary damage, secondary damage, and microbial amplification. For this reason, the WRT standard emphasizes that mitigation activities should beginas soon as it is safe to do so, following an initial hazard assessment.

Beginning mitigation promptly limits moisture migration, reduces absorption into hygroscopic materials, and decreases the duration materials remain above safe moisture thresholds. Early actions such as stopping the water source, removing bulk water, and initiating controlled drying significantly reduce structural deterioration and restoration costs. The WRT manual repeatedly reinforces thatdelays increase damage, regardless of water category or class.

Waiting for adjuster authorization or focusing on antimicrobial use before drying does not align with the standard of care. Antimicrobials are supplemental and do not replace drying. Likewise, baseboard removal may be necessary but is not the primary factor in minimizing drying time.

The ANSI/IICRC S500 standard supports emergency mitigation to prevent further damage and explicitly recognizes that restorers may need to act before third-party approvals when necessary to protect the structure and occupants. Prompt mitigation is therefore both a technical and professional responsibility.