The IICRC WRT body of knowledge explicitly recognizes lead-based paint and asbestos-containing materials as regulated hazardous materials that require compliance with federal, state, and local laws when disturbed, removed, or repaired. These materials pose significant health risks when fibers or particles become airborne and are therefore subject to strict regulatory oversight.

Lead-based paint, commonly found in structures built before regulatory bans, can produce hazardous dust during demolition or sanding. Asbestos-containing adhesives, mastics, or building materials can release microscopic fibers when disturbed, leading to long-term respiratory disease risks. The WRT manual emphasizes that restoration technicians must not disturb regulated materials unless they are properly trained, certified, and authorized to do so, or unless licensed specialists are retained.

The presence of regulated materials must be identified during the initial inspection and hazard assessment, and work plans must be adjusted accordingly. Failure to comply with applicable regulations can result in serious legal liability, fines, and health consequences.

Other listed materials—such as gypsum board, MDF, or vinyl flooring—may require removal due to water damage but are not inherently regulated hazardous materials under federal law. The WRT standard reinforces that compliance with environmental and occupational safety regulations is a non-negotiable component of professional restoration practice.