Exact Extract — Huawei Training Material (Automatic SDN Network O & M, p.29):
“BGP-LS: A method of collecting network topology information, which makes it easier and more efficient to collect topology information. BGP-LS Route: A medium that carries network topology information. There are three types of BGP-LS routes, which are used to carry node, link, and route prefix information respectively. The three types of routes work together to transmit topology information.”
Huawei Reference Verification:
Huawei's BGP-LS protocol-concepts module describes BGP-LS as a mechanism for collecting topology information through BGP. It defines three principal link-state NLRI categories carrying node information, link information and route-prefix information. An IGP learns the network topology, and BGP-LS speakers summarize and export it to a controller for centralized traffic-engineering computation. SRv6 Policy delivery is instead performed using BGP SR Policy mechanisms or other supported southbound interfaces, not ordinary BGP-LS topology advertisement. Therefore the function sought is topology and prefix collection.
Technical Deep Dive:
C is correct. BGP-LS removes the need for a centralized controller to run every IGP protocol directly. OSPF and IS-IS still build their routing-domain LSDBs, but BGP-LS speakers export node, link and prefix attributes in a normalized form. The controller assembles a multi-domain topology, combines TE attributes such as bandwidth and delay, and computes optimized SRv6 service paths. BGP-LS is not primarily an ordinary IPv4/IPv6 unicast route delivery channel, nor is it the BGP SR Policy address family used to distribute headend policies. BGP-LS supplies network state; policy signaling supplies traffic-steering instructions. The training material explicitly states that a BGP-LS route is a medium for node, link and prefix topology information. This is why the topology-and-prefix selection is the unambiguous answer.
───────────────────────────────────────────────────────
Submit