Exact Extract — Onsite Storage Requirements (PDF page 176, training slide 35)
On-site management: Take moisture-proof measures on the ground; keep the goods away from direct sunlight and heat sources; keep dry and ventilated; do not perform hot work operations such as welding or cutting
Technical Deep Dive:
Energy-storage products, particularly lithium-ion batteries, require controlled warehousing conditions because mechanical damage, elevated temperatures, electrical faults, and ignition sources can create significant fire and thermal-runaway hazards.
Option C is correct. Welding is classified as hot work because it generates intense heat, sparks, molten metal, and other potential ignition sources.
Performing welding activities in storage areas containing energy-storage batteries can expose stored products, packaging materials, and surrounding infrastructure to unacceptable thermal and fire risks.
Huawei ' s warehousing requirements prohibit hot work operations such as welding and cutting in these storage areas.
Other activities listed in the question may be permitted under appropriate operating conditions.
Stacking must comply with the specified height limitations, packaging requirements, load-bearing capacity, and storage arrangement.
Moving requires suitable mechanical handling equipment, trained personnel, and precautions against impact, puncture, dropping, or deformation.
Transporting must comply with applicable dangerous-goods classification, packaging, handling, and transport requirements.
Battery storage areas should also maintain suitable ventilation, environmental monitoring, firefighting facilities, and separation from incompatible materials.
An SQA engineer must verify that the warehouse operator follows the applicable storage requirements and that prohibited activities are prevented through clear site controls.
Final verification: C is explicitly prohibited by the onsite storage requirements.
Submit