ForHCP G10 nodes, the default password to access theBIOSis set tohosyu95. This is a standard password used for initial access to the BIOS settings, allowing administrators to configure the basic hardware settings of the HCP node.
BIOS Access:The BIOS is the first layer of system settings that control how the hardware operates before the system boots into the operating system or the HCP software. Accessing the BIOS is usually necessary during the initial setup or hardware maintenance of HCP nodes.
Security Considerations:After initial setup, it is highly recommended to change the default BIOS password for security reasons. Using default credentials like "hosyu95" can expose the system to potential unauthorized access if left unchanged.
The default password is documented in theHCP G10 Installation Guidesprovided by Hitachi Vantara, which emphasizes the importance of securing this access after deployment.
References:
Hitachi Vantara HCP G10 Installation and Administration Guide
Hitachi Vantara HCP G10 Security Configuration Best Practices
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit