F5 BIG-IP ASM Specialist 303 Question # 152 Topic 16 Discussion

F5 BIG-IP ASM Specialist 303 Question # 152 Topic 16 Discussion

303 Exam Topic 16 Question 152 Discussion:
Question #: 152
Topic #: 16

There are three servers in the pool: 172.16.20.1, 172.16.20.2, and 172.16.20.3, with the virtual IP address 10.0.20.88.

A user CANNOT connect to an HTTP application. To understand the problem and find a solution, the LTM Specialist runs two concurrent traces on the LTM device, with the following results:

Trace on client side:

tcpdump: verbose output suppressed, use -v or -vv for full protocol decode

listening on 0.0, link-type EN10MB (Ethernet), capture size 96 bytes

22:22:07.423759 IP 172.16.20.100.53875 > 10.0.20.88.80: S 998346084:998346084(0) win 5840

22:22:07.424056 IP 10.0.20.88.80 > 172.16.20.100.53875: S 4671780:4671780(0) ack 998346085 win 4380

22:22:07.424776 IP 172.16.20.100.53875 > 10.0.20.88.80: . ack 1 win 365

22:22:07.424790 IP 172.16.20.100.53875 > 10.0.20.88.80: P 1:149(148) ack 1 win 365

22:22:07.424891 IP 10.0.20.88.80 > 172.16.20.100.53875: . ack 149 win 4528

22:22:12.024850 IP 10.0.20.88.80 > 172.16.20.100.53875: R 1:1(0) ack 149 win 4528

6 packets captured

6 packets received by filter

0 packets dropped by kernel

Trace on server side:

tcpdump: verbose output suppressed, use -v or -vv for full protocol decode

listening on internal, link-type EN10MB (Ethernet), capture size 96 bytes

22:22:07.424881 IP 172.16.20.100.53875 > 172.16.20.2.80: S 51116678:51116678(0) win 4380

22:22:08.424893 IP 172.16.20.100.53875 > 172.16.20.2.80: S 51116678:51116678(0) win 4380

22:22:09.625082 IP 172.16.20.100.53875 > 172.16.20.2.80: S 51116678:51116678(0) win 4380

22:22:10.825194 IP 172.16.20.100.53875 > 172.16.20.2.80: S 51116678:51116678(0) win 4380

4 packets captured

4 packets received by filter

0 packets dropped by kernel

What should the LTM Specialist do to solve the problem?


A.

Edit the packet filter rules.


B.

Modify the monitor of the pool.


C.

Enable the virtual server.


D.

Configure the virtual server to use SNAT.


Get Premium 303 Questions

Contribute your Thoughts:


Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.