To return a node from service mode to normal mode in a Dell EMC PowerStore system, the svc_rescue_state clear command should be used.This command clears the service mode state of the node and prepares it to return to normal operational mode1.
Here are the steps to perform this action:
Log in to the appliance from an SSH client.
Run the svc_rescue_state clear command to clear the boot mode.
Then, run the svc_node reboot command to reboot the node and return it to normal mode.
After the reboot, you can verify that the node has returned to normal mode by running the svc_rescue_state list command again.
It is important to follow these steps carefully to ensure that the node transitions back to normal mode without any issues.For more detailed instructions or if you encounter any problemsduring this process, refer to the Dell EMC PowerStore Service Scripts Guide or contact Dell EMC Support for assistance1.
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit