In the CBCI EDGE curriculum, a project can be certified for a defined scope when the owner is pursuing certification for only the area under their control, such as a tenant space, a single owned floor, or a partial building section. In this case, the “project” for EDGE purposes is the single-floor office area owned by Excellence Lawyers, not the entire high-rise. Therefore, the EDGE model must reflect the geometry and specifications of the certified scope only.

That means the envelope inputs should correspond to the office floor’s relevant boundaries: external façade walls (if any), glazing areas, and the resulting Window-to-Wall Ratio for that office scope. Internal partitions that adjoin other conditioned spaces are not treated the same as external envelope elements, because they do not drive the same heat transfer to the outdoors. The same principle applies to wall materials and lengths: they must represent the office area being certified, using the actual constructions that apply to that scope.

Modeling the whole building would incorrectly attribute systems and envelope characteristics outside the owner’s control and could distort the calculated savings and audit evidence. Hence, the correct approach is to model the office floor only.