When an AP authenticates to the wired infrastructure with 802.1X, the AP is the supplicant and the access switch is the authenticator. The AP therefore needs an identity that the RADIUS server can verify. On the controller, the administrator enters the credentials in the 802.1X Supplicant Credentials section of the global configuration, with the option to over-ride credentials per AP. On the Catalyst 9800 the same function is found in the AP join profile, which holds the username and password used by the AP. The AP uses these credentials with EAP-FAST by default. The RADIUS shared secret is a secret between the switch and the RADIUS server and is never configured on the AP, and the TACACS server address belongs to device administration. Local access point credentials are the credentials for the AP console and SSH login, not for 802.1X. The supplicant credentials are what must be configured. On the Catalyst 9800 this maps to the dot1x username and password commands of the AP join profile, together with the EAP type that the switch port expects.
[Reference:Blueprint 8.2 (Implement access point authentication including 802.1X); Cisco Wireless Controller and Catalyst 9800 documentation, AP 802.1X supplicant credentials. Source key listed B; corrected to D (see appendix)., ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit