An engineer must implement intrusion protection on the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which AP mode and submode must be implemented?
Cisco's Adaptive wIPS deployment guide describes two ways of running wIPS on an AP. A monitor mode AP scans all channels full time but cannot serve clients, so a separate AP is needed for client access. A local mode AP with the wIPS submode, known as Enhanced Local Mode, serves clients and also performs wIPS detection, so no additional overlay of APs is needed. The guide explains that ELM is on its operating channel most of the time and therefore detects on-channel attacks quickly, while off-channel detection is best effort. The scenario states that coverage is adequate, on-channel attacks are the main concern and installing more APs in the historic building is difficult. Monitor mode would require additional APs, whereas ELM protects the network with the existing client-serving APs. The correct choice is AP mode local with the AP submode wIPS. To confirm the configuration on the controller, the show wireless wps wips summary command displays the wIPS state of the AP, together with the AP mode and submode.
[Reference:Blueprint 5.5 (Implement wIPS); Cisco Adaptive wIPS Deployment Guide, Enhanced Local Mode. Source key listed B; corrected to D (see appendix)., ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit