The client details in the exhibit show that the 802.11 state is Associated, the security policy type is WPA2 and the policy manager state is DHCP_REQD. The policy manager state describes the stage that the client has reached in the controller's client state machine. DHCP_REQD means that the client has completed association and Layer 2 authentication, and the controller is waiting for the client to obtain an IP address through DHCP. The client does not move on to the RUN state until the address is learned, because the controller does not allow data traffic from a client without a valid IP address. The authentication therefore does not appear to be the problem, and the other data on the screen, such as the local switching and the missing RADIUS data, are not required to explain the symptom. The reason the client cannot reach the RUN state is that it is not getting an IP address.
[Reference:Blueprint 7.4 and 7.4.a (Troubleshoot client connectivity using the WLC); Cisco Wireless Controller client troubleshooting., ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit