Pass the CyberArk CyberArk Secrets Manager SECRET-SEN Questions and answers with CertsForce

The most likely cause for this issue is A. The application ID or Application Provider does not have the correct permissions on the safe. The CyberArk Central Credential Provider (CCP) is a web service that enables applications to retrieve secrets from the CyberArk Vault using REST API calls. The CCP requires an application ID or an Application Provider to authenticate and authorize the application before returning the requested secret. The application ID or Application Provider must have the Retrieve and List permissions on the safe where the secret is stored, otherwise the CCP will not be able to find the matching secret and will return an error.

To resolve this issue, you should verify that the application ID or Application Provider has the correct permissions on the safe, and that the safe name and object name are correctly specified in the REST API call. You can use the CyberArk Privileged Access Security Web Access (PVWA) or the PrivateArk Client to check and modify the permissions on the safe. You can also use the CyberArk REST API Tester or a tool like Postman to test the REST API call and see the response from the CCP. For more information, refer to the following resources:

Credential Providers - Centralized Credential Management | CyberArk, Section “Central Credential Provider”

Credential Provider - CyberArk, Section “Using the Credential Provider”

How to Build Your Secrets Management REST API’s into Postman, Section “How to Build Your Secrets Management REST API’s into Postman”

Conjur is a secrets management solution that securely stores and manages secrets and credentials used by applications, DevOps tools, and other systems. Conjur can be deployed in different scenarios, depending on the needs and preferences of the organization. One of the possible deployment scenarios is to deploy the Leader cluster outside a Kubernetes environment, and the Followers and Standbys inside or outside the environment.

The Leader cluster is the primary node that handles all write operations and coordinates the replication of data to the Follower and Standby nodes. The Leader cluster consists of one active Leader node and one or more Standby nodes that can be promoted to Leader in case of a failure. The Leader cluster can be deployed outside a Kubernetes environment, such as on a virtual machine or a physical server, using Docker or other installation methods. This can provide more control and flexibility over the configuration and management of the Leader cluster, as well as better performance and security.

The Follower and Standby nodes are read-only replicas of the Leader node that can serve requests from clients and applications that need to retrieve secrets or perform other read-only operations. The Follower and Standby nodes can be deployed inside or outside a Kubernetes environment, depending on the use case and the availability requirements. For example, if the clients and applications are running inside a Kubernetes cluster, it may be convenient and efficient to deploy the Follower and Standby nodes inside the same cluster, using Helm charts or other methods. This can reduce the network latency and complexity, and leverage the Kubernetes features such as service discovery, load balancing, and health checks. Alternatively, if the clients and applications are running outside a Kubernetes cluster, or if there is a need to distribute the Follower and Standby nodes across different regions or availability zones, it may be preferable to deploy the Follower and Standby nodes outside the Kubernetes cluster, using Docker or other methods. This can provide more scalability and resiliency, and avoid the dependency on the Kubernetes cluster.

References = Conjur Deployment Scenarios; Conjur Cluster Installation; Conjur Kubernetes Integration

 According to the CyberArk Sentry Secrets Manager documentation, the Secrets Provider for Kubernetes can be deployed as an init container or a sidecar in Push-to-File mode. In Push-to-File mode, the Secrets Provider pushes Conjur secrets to one or more secrets files in a shared volume in the same Pod as the application container. The application container can then consume the secrets files from the shared volume. The deployment option that should be used to support rotation with Push-to-File mode is the sidecar, because the sidecar can run continuously and check for updates to the secrets in Conjur. If changes are detected, the sidecar can update the secrets files in the shared volume. The init container, on the other hand, runs to completion and does not support rotation. The application container and the service broker are not valid deployment options for the Secrets Provider for Kubernetes in Push-to-File mode. References: 1: Secrets Provider - Init container/Sidecar - Push-to-File mode 2: Secrets Provider - init container/sidecar - Push-to-File mode

This is the correct answer because the SynchronizerReplication.config file contains the configuration settings for the Vault Conjur Synchronizer service (Synchronizer) to sync secrets from the CyberArk Vault to the Conjur database. The SYNCALLPROPERTIES parameter specifies whether to sync all the properties of the accounts in the Vault or only the password property. By default, the SYNCALLPROPERTIES parameter is set to false, which means that only the password property is synced. To sync all the properties, such as the address and the user, the SYNCALLPROPERTIES parameter needs to be set to true. This answer is based on the CyberArk Secrets Manager documentation1 and the CyberArk Secrets Manager training course2.

The other options are not correct because they do not configure the Synchronizer to properly sync all properties. Modifying VaultConjurSynchronizer.exe.config, uncommenting SYNCALLPROPERTIES and updating its value to true is not a valid option, as this file does not contain the SYNCALLPROPERTIES parameter. The VaultConjurSynchronizer.exe.config file contains the configuration settings for the Synchronizer service, such as the log level, the log path, and the service name. The SYNCALLPROPERTIES parameter is only found in the SynchronizerReplication.config file.

Modifying Vault.ini, uncommenting SYNCALLPROPERTIES and updating its value to true is not a valid option, as this file does not contain the SYNCALLPROPERTIES parameter. The Vault.ini file contains the configuration settings for the CyberArk Central Credential Provider (CCP) to connect to the Vault server and provide credentials to the applications. The SYNCALLPROPERTIES parameter is not related to the CCP configuration or functionality.

In the Conjur UI under Cluster > Synchronizer > Config, changing SYNCALLPROPERTIES and updating its value to true is not a valid option, as this section does not exist in the Conjur UI. The Conjur UI does not have a Cluster, Synchronizer, or Config section. The Conjur UI has a Cluster Config section under Settings, but this section is used to configure the Conjur cluster settings, such as the master IP address, the follower IP address, and the seed fetcher IP address. The SYNCALLPROPERTIES parameter is not related to the Conjur cluster configuration or functionality.

AWS -> authn-iam

Azure -> authn-azure

GCP -> authn-gcp

JWT Provider -> authn-jwt

Explanation: Conjur supports different authenticators for different cloud platforms. Each authenticator allows a resource or service running on the cloud platform to authenticate to Conjur using a unique identity token signed by the cloud provider. The following are the descriptions of each authenticator:

authn-iam: Enables an AWS resource to use its AWS IAM role to authenticate with Conjur. The resource sends a request to the AWS Security Token Service (STS) to get a signed AWS access token, and then sends the token to Conjur for verification.

authn-azure: Enables an Azure resource to authenticate with Conjur. The resource sends a request to the Azure Instance Metadata Service (IMDS) to get a signed Azure access token, and then sends the token to Conjur for verification.

authn-gcp: Enables a Google Cloud Platform resource to authenticate with Conjur. The resource sends a request to the Google Cloud Identity and Access Management (IAM) service to get a signed Google identity token, and then sends the token to Conjur for verification.

authn-jwt: Enables an application to authenticate to Conjur using a JWT from a JWT Provider. The application obtains a JWT from the JWT Provider, and then sends the JWT to Conjur for verification.

References: You can find more information about the Conjur authenticators in the following resources:

Supported Conjur Cloud authenticators

Configure Conjur Cloud authenticators

GCP Authenticator

 Secrets Provider and Secretless are two solutions that can minimize the Kubernetes application code changes required to adopt Conjur for secrets access. Secrets Provider is a Kubernetes Job or Deployment that runs as an init container or application container alongside the application pod. It retrieves secrets from Conjur and writes them to one or more files in a shared, mounted volume. The application can then consume the secrets from the files without any code changes, as reading local files is a common and platform-agnostic method. Secretless is a sidecar proxy that runs as a separate container in the same pod as the application. It intercepts the application’s requests to protected resources, such as databases or web services, and injects the secrets from Conjur into the requests. The application does not need to handle any secrets in its code, as Secretless handles the authentication and authorization for it. References: CyberArk Secrets Provider for Kubernetes, Secretless Broker

According to the CyberArk Sentry Secrets Manager documentation1, the steps to failback to the primary site after a manual failover to the disaster recovery site are as follows:

On the DR site, stop the Conjur Leader node using the command docker stop .

On the primary site, generate a seed for the new Leader node using the command evoke seed leader . This will create a file named .tar in the current directory.

On the primary site, copy the Leader seed file to the new Leader server using the command scp .tar :.tar

On the new Leader server, create a new container using the same name as the one you just stopped, and load the Leader seed file using the command docker run --name -d --restart=always -v /var/log/conjur:/var/log/conjur -v /opt/conjur/backup:/opt/conjur/backup -p "443:443" -p "5432:5432" -p "1999:1999" cyberark/conjur:latest seed fetch .tar

On the new Leader server, configure the Conjur Leader node using the command evoke configure leader -h -p <admin-password>

On the new Leader server, reconfigure the Vault Conjur Synchronizer to point to the new Conjur Leader using the command evoke vault sync set

On the DR site, generate a seed for the new Standby node using the command evoke seed standby . This will create a file named .tar in the current directory.

On the DR site, copy the Standby seed file to the new Standby server using the command scp .tar :.tar

On the new Standby server, create a new container using the same name as the one you just stopped, and load the Standby seed file using the command docker run --name -d --restart=always -v /var/log/conjur:/var/log/conjur -v /opt/conjur/backup:/opt/conjur/backup -p "443:443" -p "5432:5432" -p "1999:1999" cyberark/conjur:latest seed fetch .tar

On the new Standby server, re-enroll the node to the cluster using the command evoke cluster enroll

The other options are not correct, as they are either unnecessary or incorrect. Contacting CyberArk for a new license file is not required, as the license is valid for both sites. Reconfiguring the Vault Conjur Synchronizer to point to the new Conjur Leader is a step that should be done on the new Leader server, not on the DR site. Triggering autofailover to promote the Standby in Site A to Leader is not possible, as the Standby node is not aware of the manual failover and will not accept the promotion request.

This is the correct answer because the message indicates that the audit retention process has successfully completed and deleted the specified number of rows from the audit database (audit.db). The audit retention process is a scheduled task that runs periodically to delete old audit records from the audit database based on the retention period configured in the Conjur UI. The audit retention process also performs a vacuum operation to reclaim the disk space and optimize the database performance. The message does not require any action from the user, as it is a normal and expected outcome of the audit retention process. This answer is based on the CyberArk Secrets Manager documentation1 and the CyberArk Secrets Manager training course2.

The other options are not correct statements about the message. The message does not imply that the user specified for Conjur does not have the appropriate permissions to retrieve the audit database, as the message is not an error or a warning, but a confirmation of the audit retention process. The user specified for Conjur is the user that is used to connect to the Conjur server and perform operations on the Conjur resources, such as roles, policies, secrets, and audit records. The user specified for Conjur needs to have the appropriate permissions to access the audit database, but the message does not indicate any problem with the user permissions.

The message does not imply that when audit retention was performed, the query on the UI audit database generated an error, as the message is not an error or a warning, but a confirmation of the audit retention process. The query on the UI audit database is the query that is used to display the audit records in the Conjur UI. The query on the UI audit database is not related to the audit retention process, which is a background task that runs on the Conjur server and deletes the old audit records from the audit database. The message does not indicate any problem with the query on the UI audit database.

The message does not imply that the Vault Conjur Synchronizer successfully deleted the password objects that were marked for deletion in the PVWA, as the message is not related to the Vault Conjur Synchronizer or the password objects. The Vault Conjur Synchronizer is a service that synchronizes secrets from the CyberArk Vault to the Conjur database. The password objects are the accounts in the CyberArk Vault that store the credentials for various platforms and devices. The message is related to the audit retention process, which deletes the old audit records from the audit database. The message does not indicate any problem or action with the Vault Conjur Synchronizer or the password objects.