Pass the CompTIA Linux+ XK0-005 Questions and answers with CertsForce

The command that would allow this to happen is docker pull nginx. Docker is a software platform that allows the administrator to create, run, and manage containers on Linux systems. Containers are isolated and lightweight environments that can run applications and services without affecting the host system. Docker uses images to create containers, which are files that contain the code, libraries, dependencies, and configuration of the applications and services. Docker uses a registry to store and distribute images, which is a service that hosts and serves images. Docker Hub is the default public registry that provides a large number of official and community images. Nginx is a popular web server and reverse proxy that can run as a container. The command docker pull nginx will download the latest version of the Nginx image from the Docker Hub registry to the local cache, which is the storage location for the images on the host system. This will allow the administrator to provide a new Nginx image from the registry to the local cache. This is the correct command to use to accomplish the task. The other options are incorrect because they either do not download an image from the registry (docker attach nginx or docker commit nginx) or do not exist (docker import nginx). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 19: Managing Cloud and Virtualization Technologies, page 571.

Rugged appliances are small appliances with ruggedized hardware that use Gaia embedded as their operating system. Gaia embedded is a version of Gaia that is optimized for embedded devices such as Rugged appliances and Quantum Spark appliances. Gaia embedded supports features such as VPN, firewall, identity awareness, application control, URL filtering, and anti-bot. Gaia embedded does not use Centos Linux, Gaia, or Red Hat Enterprise Linux version 5 as their operating system. References: Check Point Rugged Appliance Datasheet, page 1.

The ip link show eth1 command can be used to check the link status of a network interface named eth1 in a Linux server. It will display information such as the MAC address, MTU, state, and flags of the interface. The ifconfig hw eth1 command is invalid, as hw is not a valid option for ifconfig. The netstat -r eth1 command would display the routing table for eth1, not the link status. The ss -ti eth1 command would display TCP information for sockets associated with eth1, not the link status. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 13: Networking Fundamentals, page 436.

The ss command is used to display information about socket connections, such as the port number, state, and process ID. The error message indicates that the port 80 is already in use by another process, which prevents the Apache web server from binding to it. By using the ss command with the -l and -n options, the administrator can list all the listening sockets and their port numbers in numeric form, and identify which process is using the port 80. For example: ss -ln | grep :80. The ip, dig, and nc commands are not relevant for this issue, as they are used for different purposes, such as configuring network interfaces, querying DNS records, and testing network connectivity.

To unlock an account that has been locked due to login failures, the administrator can use the command pam_tally2 --user=dev2 --reset (D). This will reset the failure counter for the user “dev2” and allow the user to log in again. The other commands will not unlock the account, but either display or increase the failure count. References:

[CompTIA Linux+ Study Guide], Chapter 4: Managing Users and Groups, Section: Locking Accounts with pam_tally2

[How to Lock and Unlock User Account in Linux]

After installing a new version of a package that includes a configuration file that already exists on the system, such as /etc/httpd/conf/httpd.conf, RPM will create a new file with the .rpmnew extension instead of overwriting the existing file. This allows the administrator to review the default configuration that shipped with this version and compare it with the current configuration before deciding whether to merge or replace the files. The /etc/named.conf.rpmsave file is created by RPM when a package is uninstalled and it contains a configuration file that was modified by the administrator. This allows the administrator to restore the configuration file if needed. The /etc/named.conf file is the main configuration file for the BIND name server, not the httpd web server. The /etc/bind/bind.conf file does not exist by default in Linux systems. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 19: Managing Packages and Software, page 561.

The administrator should place the public keys for the server in the ~/.ssh/authorized_keys file. The SSH (Secure Shell) protocol is a method for establishing secure and encrypted connections between remote systems. The SSH protocol supports two types of authentication: password-based and key-based. Password-based authentication requires the user to enter the password of the remote system every time they connect. Key-based authentication requires the user to generate a pair of cryptographic keys: a public key and a private key. The public key is stored on the remote system, while the private key is kept on the local system. The public key and the private key are mathematically related, but not identical. The SSH protocol uses the keys to verify the identity of the user and establish a secure connection without requiring a password. The ~/.ssh/authorized_keys file is a file that contains the public keys of the users who are allowed to connect to the remote system using key-based authentication. The administrator should place the public keys for the server in this file, one per line, and set the appropriate permissions for the file. The administrator should also configure the SSH server to enable key-based authentication by editing the /etc/ssh/sshd_config file and setting the option PasswordAuthentication to no. The administrator should place the public keys for the server in the ~/.ssh/authorized_keys file. This is the correct answer to the question. The other options are incorrect because they are not the standard locations for the public keys for the server (~/.sshd/authkeys, ~/.ssh/keys, or ~/.ssh/keyauth). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 17: Implementing Basic Security, page 513.

The remediation step that will prevent the web service from running as a privileged user is adding the User=webservice to the [Service] section of the service file. The service file is a configuration file that defines the properties and behavior of a systemd service. The systemd is a system and service manager that controls the startup and operation of Linux systems. The service file contains various sections and options that specify how the service should be started, stopped, and managed. The [Service] section defines how the service should be executed and what commands should be run. The User option specifies the user name or ID that the service should run as. The webservice is the name of the user that the administrator wants to run the web service as. The administrator should add the User=webservice to the [Service] section of the service file, which will prevent the web service from running as a privileged user, such as root, and improve the security of the system. This is the correct remediation step to use to prevent the web service from running as a privileged user. The other options are incorrect because they either do not change the user that the service runs as (removing the ExecStart=/usr/sbin/webserver -D OPTIONS from the service file or updating the EnvironmentFile line in the [Service] section to /home/webservice/config) or do not affect the user that the service runs as (changing the multi-user.target in the [Install] section to basic.target). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 15: Managing System Services, page 458.

The docker image tag test test:v1 command can be used to assign the v1 version to the image called test. This command creates a new tag for the existing image, without changing the original image. The docker image save test test:v1 command would save the image to a file, not assign a version. The docker image build test:vl command is invalid, as vl is not a valid version number. The docker image version test:v1 command does not exist. References: [CompTIA Linux+ (XK0-005) Certification Study Guide], Chapter 16: Virtualization and Cloud Technologies, page 500.

The command firewall-cmd --query-service http will accomplish the task of checking whether web traffic has already been allowed through the firewall. The firewall-cmd command is a tool for managing firewalld, which is a firewall service that provides dynamic and persistent network security on Linux systems. The firewalld uses zones and services to define the rules and policies for the network traffic. The zones are logical groups of network interfaces and sources that have the same level of trust and security. The services are predefined sets of ports and protocols that are associated with certain applications or functions. The --query-service http option queries whether a service is enabled in a zone. The http is the name of the service that the command should check. The http service represents the web traffic that uses the port 80 and the TCP protocol. The command firewall-cmd --query-service http will check whether the http service is enabled in the default zone, which is usually the public zone. The command will return yes if the web traffic has already been allowed through the firewall, or no if the web traffic has not been allowed through the firewall. This is the correct command to use to accomplish the task. The other options are incorrect because they either do not exist (firewalld query-service-http or firewalld --check-service http) or do not query the service (firewall-cmd --check-service http instead of firewall-cmd --query-service http). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 392.