Month End Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: simple70

Pass the Cisco CCNP Data Center 300-610 Questions and answers with CertsForce

Viewing page 5 out of 9 pages
Viewing questions 41-50 out of questions
Questions # 41:

A network architect designs the iSCSI architecture. The requirements are to achieve high performance and a low amount of oversubscription and to minimize latency. Which two actions must be taken to meet these requirements? (Choose two.)

Options:

A.

Configure the size of the payload in each frame to MTU 9000.


B.

Minimize the number of hops between the storage and the hosts.


C.

Enable iSCSI port binding on the Initiator device.


D.

Set the size of the payload in each frame to MTU 1500.


E.

Use a software-based iSCSI adapter on the client side.


Expert Solution
Questions # 42:

A Cisco engineer is configuring MPLS VPN BGP at a customer site that is connected to the provider site by more than one path MPLS VPN BGP Local Convergence link protection is enabled. After the engineer installs the main forwarding path and the redundant backup path within the BGP, they assign a unique route distinguisher to each VRF table on all PE devices that serve as a backup to the link. What is a prerequisite for this local convergence to work?

Options:

A.

Interautonomous system option A (back-to-back VRF) is active.


B.

BGP must support lossless switchover between operational paths


C.

IP/GRE is enabled.


D.

The system is performing a PE-CE link protection on both ends


Expert Solution
Questions # 43:

A network engineer is implementing Cisco UCS manager with Cisco UCS center integration. The company is strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS manager. Which two profile must be used to meet these requirements? (Choose two.)

Options:

A.

Global maintenance


B.

Public network control


C.

Restricted chassis


D.

Local power


E.

Local service


Expert Solution
Questions # 44:

An architect must automate routine tasks within a data center The data center exclusively uses Cisco Nexus Series Switches The networking team lacks proper programming knowledge and prefers an automation solution that leverages NXOS commands Any configuration change must use HTTPS for transport due to a security compliance requirement. Which solution must the architect choose?

Options:

A.

NX-API


B.

Python-API


C.

Chef


D.

Terraform


Expert Solution
Questions # 45:

A network engineer is designing a Cisco Hyperflex infrastructure. The Infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.

Which storage connectivity method must be used to meet these requirements?

Options:

A.

Internet Small Computer Systems Interface


B.

Fibre Channel over Ethernet


C.

raw device mapping


D.

server message block


Expert Solution
Questions # 46:

Which authentication software natively runs within the CLI of Cisco NX-OS devices?

Options:

A.

Python


B.

Ansible


C.

Puppet


D.

Chef


Expert Solution
Questions # 47:

A customer wants to deploy a Layer 2 extension over a transport infrastructure for multiple data centers. The data center technology should support a localized Layer 3 gateway, a separate flooding domain, and STP isolation per data center. Which DCI technology meets these requirements?

Options:

A.

Pseudowire


B.

VXLAN EVPN


C.

E-Line


D.

E-LAN


Expert Solution
Questions # 48:

A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?

Options:

A.

Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.


B.

Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.


C.

Increase the queuing buffer in the port-channel interface connected to the storage array.


D.

Add an additional FCoE VLAN to the SAN network.


Expert Solution
Questions # 49:

Which two paths are provided by deploying an OOB management network in a data center that uses Cisco Nexus switches? (Choose two.)

Options:

A.

Layer 2 for a vPC peer link


B.

Layer 3 for monitoring purposes


C.

Layer 2 for server traffic


D.

Layer 3 for vPC keepalive packets


E.

Layer 3 for server traffic


Expert Solution
Questions # 50:

Drag and drop the configurations from the left onto the correct policies on the right.

Question # 50


Expert Solution
Viewing page 5 out of 9 pages
Viewing questions 41-50 out of questions