Pass the Cisco CCNP Enterprise 300-415 Questions and answers with CertsForce

What are the two components of an application-aware firewall? (Choose two.)

Refer to the exhibit.

Customer XYZ cannot provision dual connectivity on both of its routers due to budget constraints but wants to use both R1 and R2 interlaces for users behind them for load balancing toward the hub site. Which configuration achieves this objective?

Refer to the exhibit A vBond controller was added to the controller list with the same Enterprise Root CA certificate as vManage. The two controllers can reach each other via VPNO and share the same organization name, but the control connection is not initiated- Which action resolves the issue?

After deploying Cisco SD-WAN the company realized that by default, all sites built direct IPsec VPN tunnels to each other In their previous topology all spoke sites used the head office as their next hop for the LAN segment that belongs to network 40.0.0.0/16 The company wants to deploy its previous policy, which allows the 40.0.0.0/16 network that originates at the hub to advertise to the spokes. Which configuration meets the requirement'?

A)

B)

C)

D)

Which attributes are configured to uniquely Identify and represent a TLOC route?

A network is configured with IP connectivity, and the routing protocol between devices started having problems right after the maintenance window to implement network changes. Troubleshoot and resolve to a fully functional network to ensure that:

R4

R5

A network administrator configures SNMPv3 on a Cisco WAN Edge router from CLI for monitoring purposes How many characters are supported by the snmp user command?

What is the OMP graceful restart default value on vSmart controllers and WAN Edge routers?

Exhibit.

The SD-WAN network Is configured with a default full-mesh topology. The network engineer wants the Rome WAN Edge to use the MPLS TLOC as the preferred TLOC when ….. Telnet traffic as long as me MPLS Ink has these, characteristics:

Loss: 5%

Latency: 100ms

Jitter: 100 ms

Which configuration must the network engineer use to create a list that that classifies the MPLS link characteristics?

A)

B)

C)

D)

A policy is created to influence routing in the network using a group of prefixes. What policy application will achieve this goal when applied to a site list?