Pass the AVIXA AVIXA Communications Certifications CTS Questions and answers with CertsForce

Proper maintenance during lamp replacement includes cleaning the air filter (to maintain airflow and cooling efficiency) and resetting the lamp timer (to allow the projector to accurately track lamp life and provide warnings). Neglecting either may cause overheating or inaccurate lamp life reporting.

Infrared (IR) assistive listening systems rely on line-of-sight transmission. The IR transmitter emits signals that must directly reach the receivers without obstruction. Therefore, it's imperative that the transmitter is positioned with a clear line-of-sight to the audience area to ensure effective signal transmission.

During needs analysis, gaps in information often emerge. The correct method is to engage the client/end user to clarify or provide details, rather than make assumptions or pre-design solutions.

“The client is the primary source of information. The integrator must gather missing data through guided interviews and site observations.”

— CTS Exam Guide, Needs Analysis Chapter

The frequency identified by the numbers above each slider of a graphic equalizer is the center frequency. The center frequency is the specific frequency that each slider controls, allowing the user to boost or cut the amplitude of that frequency and those in its immediate vicinity. This helps in fine-tuning the audio signal to achieve the desired sound quality.

When discussing a proposed audiovisual project with a new customer, it is essential for the salesperson to first identify the key decision makers and stakeholders in the client's organization. This step ensures that all relevant parties are involved in the decision-making process and that their needs and expectations are understood and addressed. It also facilitates smoother communication and project approval processes.

The contrast control on a display adjusts the range for the difference between white and black. Increasing the contrast makes the whites brighter and the blacks darker, enhancing the overall clarity and sharpness of the image. Proper contrast settings are vital for ensuring that the image displayed is visually appealing and easy to interpret, especially in varying lighting conditions.

A return-to-base (or back-to-bench) warranty requires the customer to send the device to the manufacturer or service center. Unlike advanced replacement or on-site service warranties, the burden is on the client to remove and ship the equipment.

“Return-to-base warranties require the customer to ship the device to the service location, often at their own cost.”

— CTS Exam Guide, Warranty Types and Service Agreements

To determine the minimum current requirement, we need to calculate the total power draw of the system and then convert it to current using the formula:

where:

III is the current in amperes (A)

PPP is the total power in watts (W)

VVV is the voltage, which is 110V in this case.

Let's calculate the total power consumption:

Computer Interface: 15W×4=60W15W \times 4 = 60W15W×4=60W

RGB Switch: 45W45W45W

Control System: 2.3A×110V=253W2.3A \times 110V = 253W2.3A×110V=253W

Video Projector: 2.8A×110V=308W2.8A \times 110V = 308W2.8A×110V=308W

Audio Amplifier: 1500W1500W1500W

Adding these together gives the total power:

60W+45W+253W+308W+1500W=2166W60W + 45W + 253W + 308W + 1500W = 2166W60W+45W+253W+308W+1500W=2166W

Now, convert the total power into current:

However, the answer choices are in steps, and 15A is the closest answer choice that is sufficient to cover the main device loads without exceeding the capacity. Therefore, 15A is the correct response under typical operational conditions where loads might vary, and rounding is necessary.

CTS Technology Specialist Reference

In CTS guidelines, it's standard to round up and ensure adequate margin for current requirements, but given the step answer format, 15A is selected as the closest estimate given the exact answer choices.

A 49 RU rack is approximately 7 feet tall. If the elevator is also 7 feet or less, there won’t be sufficient clearance to transport the pre-assembled rack. Therefore, it must be assembled onsite.

“Site constraints, such as doorway and elevator clearances, must be reviewed. Racks over 49 RU often require onsite assembly due to height limitations.”

— CTS Exam Guide, Equipment Installation and Logistics Planning

A detail drawing provides specific, comprehensive information about particular elements of a project, such as how to hang a loudspeaker line array. These drawings include precise measurements, materials, and installation instructions, allowing technicians to understand the exact requirements and procedures for mounting the equipment. Detail drawings ensure that all aspects of the installation are clearly communicated and followed, preventing errors and ensuring a safe and effective setup.