Pass the Supermicro MI300X GPU SMI300XS Questions and answers with CertsForce

ForSupermicro MI300X GPU systems,removing the power supply unit (PSU) improperlycan lead to serious issues.

Why the red lock exists?

Thered locking mechanismensures that thePSU is properly securedin the system.

Before disengaging the PSU, thered lock must first be unlockedto avoid damage.

If you forcefully shift the release lever without unlocking the red lock:

B: The power supply unit will fail→ If the PSU is removed improperly, it can causeinternal damageto power connectors, resulting in PSUfailure or improper functioning.

C: You could permanently damage the lock on the power supply unit→ Thelocking mechanismis designed for smooth disengagement. Forcefully shifting the lever canbreak or warpthe lock, making itimpossible to secure the PSU back in place.

Incorrect Answers Explained:

A (All answers are correct)→ This is incorrect becausenot all answers are valid.

D (The PSU can no longer be secured into the tray)→ This happensonly if the lock is damaged, which is covered underoption C.

Supermicro’s official documentation clearly statesthatunlocking the red lock firstis a critical step before removing or replacing the PSU.

Why Must All Cables Be Moved Out of the Way?

Themidplane bracket in Supermicro MI300X GPU systemshousesmultiple power and data connections. If cables are not movedout of the way before lowering the bracket, the following issues can occur:

Cable Pinching or Crushing

If cables are trapped beneath the midplane,their insulation can get damaged, leading to potentialshort circuits or power failures.

Improper Connector Alignment

Misplaced cablesmay obstruct connector seating, preventingMCIO, PCIe, or NVMe connections from fully engaging.

Potential Performance Issues

If data cables are twisted or bent sharply,signal integrity issuesmay arise, causingintermittent connectivity failures.

Step-by-Step Safe Midplane Installation:

✅Step 1:Identify all power and data cables before lowering the midplane bracket.✅Step 2:Move all cables out of the way and neatly route them along their designated pathways.✅Step 3:Slowly lower the midplane bracket into position, ensuring cables remain free from obstruction.✅Step 4:Check that all connectors are accessible and that no cables are trapped under the bracket.

Why Other Options Are Incorrect?

A (Only move the ribbon cable)→ Other cables may still be in the way, risking damage.

B (Only move the power cable)→ Power cables are important, butdata cables must also be repositioned.

C (Only move the I2C cable)→ The I2C cable alone is not enough;all cables need clearance.

Official Documentation Reference:

Supermicro AS-8125GS-TNMR2 Service Manualspecifies thatall cables must be moved before lowering the midplane bracket to avoid obstruction and damage.