Pass the Nutanix NCS Professional NCS-Core Questions and answers with CertsForce

When using the Foundation VM in a desktop virtualization environment and nodes are not being discovered, the first setting that the consultant should verify is the network adapter configuration, specifically ensuring it is set to a Bridged Adapter. This setting allows the virtual machine hosting the Foundation VM to connect directly to the physical network, making other network nodes visible and reachable during the discovery process. This direct network connection is critical for the Foundation tool to function correctly and discover other nodes.References: Nutanix Bible, Nutanix University

When facing issues with network communication over 10GbE links, the first command to troubleshoot is manage_ovs show_interfaces. This command allows the consultant to review the operational status and settings of each network interface, including those connected via Twinax cables to the top of rack switch. This will show whether the interfaces are correctly configured and functioning, which is essential for establishing a successful network link.

References:

Nutanix Command Reference Guide: https://portal.nutanix.com

Nutanix Community Network Troubleshooting Tips: Nutanix Community

Given the reported RX errors on eth2 and the intermittent ping loss as observed from the CVM logs, the best initial troubleshooting step that avoids VM disruption is to inspect the switch port for errors. Option C, "Check the port on the switch side for any errors," is the most direct and non-invasive approach to determining if the issue lies with the network infrastructure rather than the server hardware itself or the configuration.

This action helps identify whether the problem is related to the physical connection (e.g., port issues, switch configuration errors) without altering the current active network setup on the Nutanix node. If errors are found on the switch port, adjustments or repairs can be made accordingly, potentially resolving the RX errors without impacting the running VMs.

References:This recommendation follows Nutanix's best practices for network troubleshooting, focusing first on external network components before altering host configurations.

After deploying a Nutanix cluster with AOS and ESXi managed by a vCenter server, the consultant should ensure that both CVM eth0 and eth2 interfaces are connected to the assigned portgroups on the standard or distributed switch. This setup allows for network segmentation and proper traffic isolation, which is crucial for maintaining network security and efficiency in a virtualized environment.References: Nutanix Bible, Nutanix University NCS-Core 6.8 learning materials

Ref: https://next.nutanix.com/installation-configuration-23/backplane-net work-in-aos-5-5-27291

The administrator's goal is to maximize storage potential in a cluster already configured with post-process compression and capacity deduplication. Erasure Coding (EC-X) is an effective method to further increase space savings by reducing the amount of redundancy data required for fault tolerance. It splits data into multiple chunks, which are distributed across the cluster, and parity is calculated and stored. This method is more space-efficient compared to traditional RAID or mirroring techniques, especially in environments where large data volumes need efficient storage.

References:

Nutanix Bible: Storage Efficiency

Nutanix University: Storage Configuration and Optimization

Ref: https://kb.vmware.com/s/article/1009465

Nutanix best practices require:

CVM and AHV hosts to be on the same VLAN for seamless internal communication.

IPMI (Out-of-Band Management) on a separate VLAN to isolate management traffic.

The consultant should be aware that the subnet 192.168.5.0/24 is reserved for internal connectivity within a Nutanix cluster. This subnet is typically used for the internal operations of the Nutanix cluster, including CVM backplane communications. It is critical to ensure that this subnet does not overlap with any external network configurations to avoid networking conflicts that can affect cluster operations and communications.References: Nutanix Networking Best Practices, Nutanix Cluster Configuration Guide.