Pass the ISTQB Foundation Level ISTQB-CTFL Questions and answers with CertsForce

Test-driven development is not an example of a typical generic skill required for testing, but rather an example of a specific technical skill or a development practice that may or may not be relevant for testing, depending on the context and the objectives of the testing activities. Test-driven development is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-drivendevelopment is not a skill that is generally expected or needed for testers, especially for testers who are not involved in unit testing or who do not have access to the source code. The other options are examples of typical generic skills required for testing, which are skills that are applicable and beneficial for testing in any context or situation, regardless of the specific testing techniques, tools, or methods used. The typical generic skills required for testing include:

Be able to use test management tools and defect tracking tools: These are tools that help testers to plan, organize, monitor, and control the testing activities and resources, as well as to record, track, analyze, and resolve the defects detected during testing. These tools can improve the efficiency, the effectiveness, and the communication of the testing process, as well as to provide traceability, metrics, and reports for the testing outcomes.

Be able to communicate defects and failures to developers as objectively as possible: This is a skill that involves the ability to report and describe the defects and failures found during testing in a clear, concise, accurate, and unbiased manner, using relevant information, evidence, and terminology, without making assumptions, judgments, or accusations. This skill can facilitate the collaboration, the understanding, and the resolution of the defects and failures between the testers and the developers, as well as to prevent conflicts, misunderstandings, or blame games.

Possess the necessary social skills that support effective teamwork: These are skills that involve the ability to interact, cooperate, and coordinate with other people involved in or affected by the testing activities, such as the test manager, the test team, the project manager, the developers, the customers, the users, etc. These skills can include communication, negotiation, leadership, motivation, feedback, conflict resolution, etc. These skills can enhance the quality, the productivity, and the satisfaction of the testing process, as well as to foster a positive and constructive testing culture. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.2, Testing and Quality

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches

ISTQB® Glossary of Testing Terms v4.0, Test-driven Development, Test ManagementTool, Defect Tracking Tool, Defect Report, Failure, Social Skill2

Testing can contribute to higher quality by helping to measure the quality of software. Quality is defined as the degree to which a component or system satisfies specified requirements and customer or user needs and expectations. Testing is a process of evaluating a component or system by applying inputs and observing outputs, and comparing them with expected results. Testing can help to measure the quality of software by providing information on its functionality, performance, usability, security, reliability, etc. Testing can also help to identify and report defects in software, which can lead to improvement actions and quality assurance activities. The other options are not accurate descriptions of how testing can contribute to higher quality. Testing does not ensure that remaining defects are documented, but rather that detecteddefects are reported. Testing does not remove errors in software, but rather finds defects in software behavior or quality. Testing does not eliminate the risk with software, but rather assesses and manages the risk with software. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 3.

Checklist-based testing involves using checklists that contain items, such as potential test conditions, that should be tested. These checklists are often based on insights into what is important to the user, potential areas where software might fail, and specific aspects that need to be tested. It provides a structured yet flexible approach to testing, ensuring key areas are covered while allowing testers to use their experience and understanding of the system. Checklist-based testing is not limited to non-functional testing but can be applied to various types of testing, including functional testing.References:

ISTQB Certified Tester Foundation Level Syllabus v4.0, Section 4.4.5.

In Agile teams using the planning poker technique for estimating user stories, it is common practice to have further discussions and rounds of estimation if there is a significant discrepancy in the initial estimates. This helps in reaching a consensus and ensures that all team members understand the complexity and requirements of the user story. According to the ISTQB CTFL syllabus, planning poker involves discussions to clarify differences in estimates, especially when there is a wide range of values selected. By having Memb6 and Memb4, who provided the most pessimistic and optimistic estimates, explain their reasoning, it fosters a deeper understanding and encourages the team to converge towards a more accurate and agreed-upon estimate.

References:ISTQB CTFL Syllabus, Section on Agile methodologies and estimation techniques.

A decision table is a technique that should be used to cover all possible combinations of input conditions for withdrawing money from an Automated Teller Machine (ATM). A decision table shows combinations of inputs and/or stimuli (causes) with their associated outputs and/or actions (effects). A decision table consists of four quadrants: conditions (inputs), actions (outputs), condition entries (values) and action entries (results). A decision table can be used to test components that have multiple inputs and outputs that depend on logical combinations of conditions. For example, for testing the ATM, we can identify three input conditions: the bank card is valid, the PIN code is correct, and money is available in the user’s account. We can also identify four output actions: the card is rejected, the ATM asks for another PIN code, the ATM asks for another amount, and the ATM dispenses the money. A decision table can show all possible combinations of these conditions and actions in a systematic way.

Use case based testing is not a technique that can cover all possible combinations of input conditions for withdrawing money from an ATM. Use case based testing is a technique that verifies that a software product or system meets its specified requirements or user stories by executing realistic scenarios or workflows. Use case based testing can be used to test components that have complex or dynamic interactions with users or other systems. For example, for testing the ATM, we can identify several use cases, such as withdraw money, check balance, transfer money, etc.Each use case can have one or more scenarios that describe the steps and outcomes of the interaction. However, use case based testing may not cover all possible combinations of input conditions, as some scenarios may be omitted or overlooked.

Boundary value analysis is not a technique that can cover all possible combinations of input conditions for withdrawing money from an ATM. Boundary value analysis is a technique that tests boundary values between partitions of equivalent data. Boundary values are values at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Boundary value analysis can be used to test components that have input values that can be divided into partitions of equivalent data. For example, for testing the ATM, we can identify boundary values for the input amount, such as the minimum and maximum amount allowed by the system or the user’s account. However, boundary value analysis may not cover all possible combinations of input conditions, as some conditions may not have boundary values or may not be related to input values.

Equivalence class partitioning is not a technique that can cover all possible combinations of input conditions for withdrawing money from an ATM. Equivalence class partitioning is a technique that divides the input data and output results of a software component into partitions of equivalent data. Each partition should contain data that is treated in the same way by the component. Equivalence class partitioning can be used to test components that have input values that can be divided into partitions of equivalent data. For example, for testing the ATM, we can identify equivalence partitions for the input amount, such as valid amount (within the range allowed by the system and the user’s account) and invalid amount (outside the range allowed by the system or the user’s account). However, equivalence class partitioning may not cover all possible combinations of input conditions, as some conditions may not be related to input values or may have more than two partitions. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 4, page 34-46.

Problems in defining the right requirements is not a product risk, but rather a project risk. A product risk is a risk that affects the quality or performance of the software product itself, such as poor usability, failure-prone functionality, security vulnerabilities, compatibility issues, etc. A project risk is a risk that affects the management or delivery of the software project itself, suchas unrealistic schedule, insufficient resources, unclear scope, changing requirements, etc. The other options are examples of product risks, as they relate to the software product’s characteristics or features. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 12.

Testing is necessary for various reasons, such as:

To detect defects and failures that may affect the quality, performance, reliability or security of a software product or system

To verify that a software product or system meets its specified requirements, expectations and standards

To validate that a software product or system fulfills its intended purpose and satisfies its stakeholders’ needs

To provide information and feedback about the status and risks of a software product or system

To comply with regulations or contractual obligations that mandate testing for certain types of software products or systems The following statements describe some reasons why testing is necessary:

A) The customer decided that 100% branch coverage shall be achieved. This is a reason why testing is necessary, as it reflects a contractual obligation or a quality standard that requires testing to measure and achieve a certain level of code coverage.

C) For avionics and pharmaceutical systems software testing is mandated by standards. This is a reason why testing is necessary, as it reflects a regulation or a compliance requirement that mandates testing for certain types of software products or systems that have high safety or security risks.

D) The risks associated with delivering the system are far higher than the cost of testing. This is a reason why testing is necessary, as it reflects a risk-based approach that considers testing as an investment to reduce the probability andimpact of potential failures or defects. The following statement does not describe a reason why testing is necessary:

B) The acquisition of test automation tools was based on the assumption that it will be used m all projects. This is not a reason why testing is necessary, as it reflects a business decision or a resource allocation that does not justify the need or purpose of testing. Test automation tools are not always suitable or beneficial for all projects, and testing can be performed with or without test automation tools. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 1, page 5-6.

Non-functional testing refers to testing aspects that do not relate to specific behaviors or functions of the software but to attributes such as performance, usability, reliability, etc. Tests that capture the time it takes to save a file directly relate to the performance of the system, thus falling under non-functional testing.References:ISTQB Certified Tester Foundation Level Syllabus v4.0, Section 1.2.5 "Functional and Non-functional Testing".

Effort estimate does not depend on the budget of the project, but rather on the scope, complexity, and quality of the software product and the testing activities1. Budget is a constraint that may affect the feasibility and accuracy of the effort estimate, but it is not a factor that determines the effort estimate. Effort estimate is the amount of work required to complete the testing activities, measured in terms of person-hours, person-days, or person-months2.

The other options are correct because:

A. Once the test effort is estimated, resources can beidentified and a schedule can be drawn up, as they are interrelated aspects of the test planning process3. Resources are the people, tools, equipment, and facilities needed to perform the testing activities4. Schedule is the time frame and sequence of the testing activities, aligned with the project milestones and deadlines5.

B. Effort estimate can be inaccurate because the quality of the product under tests is not known, as it affects the number and severity of the defects that maybe found and the rework that may be needed to fix them6. Quality is the degree to which the software product satisfies the specified requirements and meets the needs and expectations of the users and clients7.

D. Experience based estimation is one of the estimation techniques, which relies on the judgment and expertise of the testers and other project stakeholders to estimate the test effort based on similar projects or tasks done in the past. Experience based estimation can be useful when there is a lack of historical data, formal methods, or detailed information about the software product and the testing activities.

References =

1 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 154

2 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 155

3 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 156

4 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 157

5 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 158

6 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 159

7 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 16

[8] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 160

[9] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 161