Pass the Huawei HCIP-Access H35-211_V2.5 Questions and answers with CertsForce

Viewing page 2 out of 2 pages
Viewing questions 11-20 out of questions
Questions # 11:

The (radio) prerequisites for esight to automatically discover OLT and MXU devices by IP address are not included

Options:

A.

Esight and the device need to be on the same network segment, otherwise the device cannot be discovered using the ARP broadcast protocol.


B.

You already have the operation permission of "Resource Access".


C.

Esight and the device can be routed to communicate (ping each other).


D.

The SMMP parameters on the esight side have been configured and are aligned with the device side SP parameters.


Expert Solution
Questions # 12:

The establishment, maintenance and dismantling of the word path between the SIP user and the server are done through the interaction of the --series of messages, so that every information contained in the SIP text has a --nature, There is no phenomenon in which a single information value appears multiple times.

Options:

A.

wrong


B.

Right


Expert Solution
Questions # 13:

(Single)When deploying home and guest services in a PON system, which of the following services has the highest priority?

Options:

A.

VOIP


B.

GAME


C.

INTERNET


D.

IPTV


Expert Solution
Questions # 14:

The maximum spectroscopic ratio supported by 10G EPON is?

Options:

A.

1: 256 (Laboratory).


B.

1:32


C.

1:128


D.

1:64


Expert Solution
Questions # 15:

(Radio) To improve link reliability, the LT device passes through two upstream ports 0/19/0 and 0/20/0 Configure the Timedelay protection group, which of the following commands is optional

Options:

A.

huawei(config)#interface giu 0/19huawei (config-if-giu-0/19)hoffline-tx-off-time 0 500


B.

huawei(protect-group-0)hprotect-group member port 0/19/0 role work


C.

huawei(protect-group-0)aprotect-group enable


D.

huawei(config)=protect-group 0 protect-target sth-nni port workmode timedelay


Expert Solution
Questions # 16:

The Class D multicast address range is from 224. 0. 0. 0 to 238. 255. 255. 255。

Options:

A.

True


B.

False


Expert Solution
Questions # 17:

(Single-choice) An IPTV user reflects that the TV cannot be watched, open the debug switch on the OLT side, and the debug printing information is as follows: huawei( config).

This can be judged by the results of the query

Options:

A.

The poN port multicast bandwidth is insufficient


B.

The user does not have permission to watch the show


C.

IGMP Sakamoto Fussel


D.

User bandwidth validation failed


Expert Solution
Questions # 18:

(Radio) When deploying GPON Type C single attribution protection, the following description is correct.

Options:

A.

The branch fiber breaks, and the state of the OLT's work port becomes standbY


B.

Two ports protected by the OLT side cannot send and receive data at the same time


C.

When the olt uplink fails, a protection reversal can be triggered


D.

The service configuration of ONU access is completely identical to the configuration before protection


Expert Solution
Viewing page 2 out of 2 pages
Viewing questions 11-20 out of questions