Pass the Huawei HCSP Presales H19-424_V1.0 Questions and answers with CertsForce

Viewing page 2 out of 4 pages
Viewing questions 11-20 out of questions
Questions # 11:

For the description of the WLAN network planning scheme in the dormitory/hotel one-in-two scene with a bathroom at the door, the correct one is ()

Options:

A.

Select butterfly wing wave AP wall-mounted bathroom corner, height 2.2~2.5m, a single AP covers the left and right 2 rooms


B.

The AP fixes the radio power and configures the maximum EIRP to improve the downlink coverage of the room through the wall, with the worst 5G downlink RSSI being -65dBm and the worst uplink RSSI being -80dBm


C.

Indoor omnidirectional APs (2*2 models such as 5761-11) are deployed separately in the corridor to ensure roaming continuity


D.

The bathroom relies on 5G for coverage and turns off 2.4G


Expert Solution
Questions # 12:

In the CloudCapmus solution, NETCONF/YANG does not support the management of Huawei devices

Options:

A.

CloudEngine S series switches


B.

CE series switches in data centers


C.

WLAN AP


D.

AR series routers


E.

USG series firewalls


Expert Solution
Questions # 13:

When SDN-IWAN is designing BGP routing control, the entire Guqian network structure is adouble-plane structure, which increases the reliability of the network, and the PE of the same plane is preferred when the BGP routing of PE equipment is selected, which is realized through ().

Options:

A.

ORIGIN


B.

MED


C.

LocalPre


D.

AS_PATH


Expert Solution
Questions # 14:

The description of the new AirEngine 5762-16W is incorrect ()

Options:

A.

Super wall penetration, one AP covers up to four rooms


B.

Unique built-in butterfly wing intelligent antenna


C.

USB expansion of external Internet of Things


D.

Dedicated to multi-partition scenarios in dormitories and hotels


Expert Solution
Questions # 15:

The opcode parameter description in SRv6 basic data plan is incorrect ()

Options:

A.

The static Opcode needs to be configured within the static segment range to prevent conflicts with the Opcode dynamically allocated by the IGP protocol. The static segment length range is determined by the static static-length parameter of the locator command.


B.

end-op, and end-m need to be statically configured


C.

end, end-x, end-dt4, end-dt6, and end-dx2 can be dynamically assigned or statically configured


D.

The SRv6SID format is Locator:Function:Args, where the Args field is also called Opcode


Expert Solution
Questions # 16:

Among the following devices, the wireless AP operating at 2.4GHz will not interfere with ()

Options:

A.

Microwave oven


B.

Bluetooth headset


C.

Infrared sensor


D.

Cordless phone working in the 2.4G frequency band


Expert Solution
Questions # 17:

The source of policy generation does not include ()

Options:

A.

IGP


B.

CLI/Netconf/yang


C.

BGP


D.

PCEP


Expert Solution
Questions # 18:

When using the planning and design tool, adjust the board position of the service board in the modular switch on which page of the tool ()

Options:

A.

BOQ management


B.

Cabinet layout design


C.

Network equipment connection design


D.

Equipment selection


Expert Solution
Questions # 19:

What is the correct step to use the WLAN cloud network planning tool to do pre-sales and after-sales network planning?()

1.Locale setting

2.One-click automatic deployment

3.View simulation

4.Export report

5.Automatic identification of obstacles

6.New project

Options:

A.

①②③④⑤⑥


B.

⑥⑤①②③④


C.

②⑤③④①⑥


D.

⑥⑤①②④③


Expert Solution
Questions # 20:

The statement about cloud AP radio tuning is incorrect

Options:

A.

Global services such as local load tuning and load balancing of the LeaderAP are limited by the performance of the AP, and the specifications of the APs that can be managed by theLeaderAP are limited


B.

If the specifications are exceeded, if APs are not grouped, APs will be randomly grouped, and adjacent APs and APs on the same floor may be assigned to different groups, which will affect global services such as tuning and load balancing


C.

AP groups in the current version are grouped through AP management VLANs, and APs in the same group need to have the same management VLANs


D.

The AP tuning group division will be reflected on the controller of the current version


Expert Solution
Viewing page 2 out of 4 pages
Viewing questions 11-20 out of questions