Pass the Huawei HCSP Presales H19-404_V1.0 Questions and answers with CertsForce

The AR5710-SE is the security-enhanced model that supports intrusion prevention, antivirus, and URL filtering concurrently. The “SE” variant is designed for branch scenarios requiring integrated routing and advanced security processing instead of only basic WAN connectivity and packet forwarding.

IPS examines network traffic for attack signatures and abnormal behavior and can block detected intrusions. Antivirus inspection identifies malicious files or content using security-signature databases. URL filtering controls access to websites based on categories, reputation, or explicitly configured allowlists and blocklists. Supporting all three functions simultaneously allows the AR5710-SE to operate as both an SD-WAN CPE and a secure branch egress gateway, reducing the requirement for an additional branch firewall.

Huawei’s SD-WAN security architecture identifies firewall protection, antivirus, IPS, and URL filtering as its principal service-traffic security functions. Huawei also recommends advanced security functions such as URL filtering, IPS, and antivirus for branch scenarios requiring stronger Internet-egress protection. Among the listed models, the AR5710-SE provides the combined feature set. Therefore, option A is correct.

==================

The statement is true. Intelligent policy recommendation does not consider only the traffic load of an individual interface or device. iMaster NCE-Campus obtains network topology, application, link-quality, bandwidth-utilization, and traffic-distribution information from multiple devices. It can then recommend or orchestrate policies that distribute traffic across the network’s available paths and resources.

For example, when multiple WAN links have the same priority and satisfy an application’s SLA requirements, per-flow load balancing can distribute different application flows among those links. Bandwidth-proportional balancing can also account for differences in link capacity, preventing a lower-bandwidth link from being overloaded. Huawei explains that load-balancing-based traffic steering can fully utilize multiple links and distribute flows across links meeting the required SLA.

Because iMaster NCE-Campus centrally manages CPEs and uniformly orchestrates service intent across the overlay network, recommendations can be evaluated from a network-wide perspective instead of through isolated local decisions. Therefore, intelligent policy recommendation can implement network-level load balancing.

==================

The AR5710-S8T1XWE-NRGL supports all four listed 5G-Advanced capabilities. Support for 3GPP Release 16 enables enhanced 5G New Radio functions and provides the standards foundation for improved mobile-WAN capacity, reliability, and service performance.

Carrier aggregation combines multiple component carriers to increase available throughput. Downlink 3CC allows three component carriers to be aggregated for received traffic, while uplink 2CC combines two carriers for transmitted traffic. This is valuable for high-bandwidth branch access, video backhaul, and mobile private-network scenarios.

Support for eight APNs permits multiple logically separated mobile services or provider profiles to be configured. Different APNs can represent enterprise services, management traffic, production systems, backup connectivity, or isolated customer networks. Global-frequency-band support improves deployment flexibility across countries and carrier networks, subject to local spectrum regulation and the supported modem variant.

Huawei SD-WAN can use 5G as a primary, secondary, or bypass link and supports combinations such as dual 5G and 5G plus wired connectivity for service assurance. Therefore, NR Release 16, carrier aggregation, eight APNs, and global frequency bands are all supported.

==================

A high-density 400GE service card for the CloudEngine S16700 series can provide 18 ports. The S16700 is positioned as a next-generation flagship campus core switch designed for ultra-high-capacity aggregation, large-scale Wi-Fi backhaul, data-center interconnection, and long-term bandwidth evolution.

An 18-port 400GE card provides a theoretical aggregate port rate of 7.2 Tbit/s in each direction before considering the switching fabric’s internal architecture and forwarding design. This density allows a single chassis slot to aggregate numerous high-speed distribution switches, connect multiple campus fabrics, or provide high-bandwidth links toward data centers and service platforms. It also reduces the number of cards and chassis required compared with lower-density 8-port, 12-port, or 16-port alternatives.

The question asks specifically for the number of physical 400GE interfaces offered by the card, not the entire chassis capacity or the number of ports after breakout. Under the H19-404 product-portfolio specification represented by this question, the correct density is 18 native 400GE ports. Therefore, option B is correct.

==================

Option C is false. Traditional QoS can classify traffic and provide differentiated treatment for service categories such as voice, video, and ordinary data. It normally performs classification, marking, policing, shaping, congestion avoidance, and queue scheduling on an interface. This provides service-level differentiation but does not deliver sufficiently refined simultaneous management across multiple users and multiple applications.

Huawei’s material explicitly states that traditional QoS schedules traffic based on port bandwidth and can differentiate traffic according to service levels, but it is difficult to distinguish traffic by user. It also states that traditional QoS cannot manage and schedule traffic from multiple services and multiple users simultaneously.

HQoS addresses this limitation through hierarchical, multi-level queues. For example, a parent level can allocate bandwidth to departments, VPNs, sites, or users, while child queues prioritize applications such as voice, video, email, and best-effort traffic. Huawei describes HQoS as hierarchical scheduling that differentiates both services and users. Therefore, statements A, B, and D are correct, while statement C incorrectly attributes an HQoS capability to traditional QoS.

==================

Authentication points should generally be placed on access devices close to the terminals. For wireless users, the AP or WLAN access device is the natural admission point because it directly controls the station’s wireless association and service access. For wired users, the access switch directly connects the endpoint and can enforce 802.1X, MAC-address authentication, VLAN authorization, ACLs, and security-group policies.

Huawei recommends access devices as authentication points for employees and specifically recommends access switches as authentication points for wired dumb terminals using MAC-address authentication. Deploying enforcement close to endpoints prevents unauthenticated or unauthorized traffic from traversing deeper into the campus network. It also improves fault isolation, policy granularity, and scalability because admission processing is distributed across access devices.

Option A is incorrect. A centralized authentication point can simplify configuration and policy management, but it does not inherently provide higher performance. It can create concentrated processing pressure, enlarge the Layer 2 scope, and allow unauthenticated traffic to travel farther before being evaluated. Therefore, the recommended principles are represented by B, C, and D.

==================

For the R024C10 software release specified in the question, the AR6700V-L cannot be deployed on Google Cloud Platform. The supported environments represented by this release and question are Amazon Web Services, Oracle Cloud, and Microsoft Azure.

Public-cloud support for a virtual CPE is release-specific. A virtual router requires more than generic virtual-machine compatibility. Huawei must provide or validate the appropriate cloud image, virtual network-interface drivers, deployment template, bootstrap mechanism, licensing integration, resource specifications, and controller-registration process for each cloud platform. Therefore, support for one KVM- or VMware-based environment does not automatically mean that every public-cloud provider is supported.

A cloud-hosted virtual CPE enables branches to establish overlay connectivity directly with cloud workloads and allows the controller to provide unified management and policy orchestration for physical and virtual edge devices. Huawei describes this model as deploying a virtual SD-WAN router on a public cloud to implement branch-to-cloud interconnection and unified policy orchestration. Under the R024C10 compatibility matrix tested by this question, GCP is excluded. Therefore, option B is correct.

==================

Huawei SD-WAN supports full-mesh, hub-spoke, and partial-mesh interconnection models. In a full-mesh topology, every site can communicate directly with the other sites. This model minimizes intermediate forwarding and is appropriate when branches frequently exchange latency-sensitive traffic such as voice, video, or collaborative application data.

In a hub-spoke topology, branch sites communicate with a central headquarters or data-center hub. Branch-to-branch traffic normally traverses that hub. The model is simple, scalable, and suitable for enterprises whose applications and shared resources are concentrated at headquarters.

Partial-mesh is used when most sites can communicate directly but some sites lack direct underlay connectivity or do not require direct tunnels. Those sites can communicate through a redirect or intermediate site. Huawei describes full-mesh, hub-spoke, and partial-mesh as supported topology designs and explains the role of a redirect site in partial-mesh networking.

“Partial-spoke” is not a defined SD-WAN topology model. A spoke is a role within hub-spoke networking rather than an independent partial-spoke topology. Therefore, A, B, and D are correct.

==================

The AirEngine 6776I-X6TH is the model designed to provide PCIe card-based IoT expansion. The PCIe interface enables an appropriate IoT expansion card to be installed so that the AP can support additional wireless or sensing technologies according to the deployment requirement. This allows the same physical access infrastructure to deliver enterprise Wi-Fi and IoT connectivity.

The capability is useful in retail, healthcare, education, manufacturing, and asset-management environments, where technologies such as Bluetooth, RFID, Zigbee, electronic shelf labels, location services, or specialized sensing systems may need to coexist with the WLAN. A modular card design is preferable when an organization requires selectable or upgradeable IoT functions rather than only fixed integrated capabilities.

Huawei’s Wi-Fi and IoT convergence architecture reduces repeated cabling, separate power systems, and independently managed wireless networks. It enables an IoT-capable AP to provide the installation position, power, management connectivity, and uplink data channel required by IoT modules. Among the models listed, the AirEngine 6776I-X6TH is the PCIe card-based IoT model. Therefore, option A is correct.

==================

The statement is false. In Parallel Redundancy Protocol, LAN A and LAN B must remain two separate, failure-independent networks. A PRP RedBox connects a singly attached node or conventional network to both parallel LANs and behaves toward the PRP network like a doubly attached node. It duplicates outgoing frames and transmits one copy through each PRP port. For incoming traffic, it accepts the first valid copy and discards the later duplicate before forwarding the frame through its interlink port.

The RedBox must not operate as a normal bridge that directly forwards frames from its LAN A port to its LAN B port. Doing so would connect the two redundant LANs, potentially creating loops, duplicate propagation, broadcast amplification, and a common failure path. That would defeat the fundamental PRP requirement that failure or disruption in one LAN must not affect the other.

The original video contains the typing error “PPR RedBox”; the correct term is PRP RedBox , meaning Parallel Redundancy Protocol Redundancy Box. PRP topology requires two separate networks with no direct links between them, while the RedBox provides controlled redundant attachment for non-PRP devices.

==================