Pass the Huawei HCPP-Storage H19-338 Questions and answers with CertsForce

CloudEngine S1270OE-O8 provides eight LPU slots, four SFU slots, two MPU slots, two CMU slots, and six power module slots1.

The redundancy design of key components of the S12700E series switches can achieve 99.999% reliability. According to the CloudEngine S12700E Series Switches Datasheet, CloudEngine S12700E series switches support N+1 backup for MPUs, SFUs, CMUs, and power modules, as well as hot swapping for all components, ensuring high availability and reliability.

iMaster NCE-FabricInsight is a network analysis platform that provides intelligent O&M for data center networks . It has the following features:

1-3-5 intelligent O&M: This is a methodology that enables network administrators to locate faults within 1 minute, identify root causes within 3 minutes, and rectify faults within 5 minutes . It uses AI algorithms and big data analysis to provide proactive fault prevention, rapid fault location, and intelligent fault recovery .

Network health check: This is a function that monitors the network status and performance in real time, and provides comprehensive network health reports and suggestions for improvement . It uses various indicators such as availability, reliability, latency, jitter, packet loss, and bandwidth utilization to evaluate the network health .

Flow analysis: This is a function that collects and analyzes the network traffic data, and provides granular visibility into the network flows and applications . It uses technologies such as sFlow, NetStream, and Telemetry to obtain the flow information, and supports features such as flow path tracing, flow quality analysis, flow anomaly detection, and flow optimization .

AI-scenario data visualization: This is a function that displays the network data in a visual and interactive way, and provides insights into the network behavior and trends . It uses technologies such as graph databases, natural language processing, and machine learning to present the network data in various scenarios, such as topology views, service views, device views, alarm views, and report views .

Capacity/traffic risk prediction: This is a function that predicts the future network capacity and traffic demand based on historical data and trend analysis, and provides suggestions for network planning and optimization . It uses technologies such as time series analysis, regression analysis, and neural networks to forecast the network growth and identify potential risks .

CloudEngine S12700E does not support PoE. PoE is a technology that allows network devices to receive power from data cables instead of power cables. PoE is usually used for access switches that connect to devices such as IP phones and wireless APs, but not for core switches such as CloudEngine S12700E. A single CloudEngine S12700E can manage up to 10K APs by integrating native WLAN AC capabilities4. A single CloudEngine S12700E can manage up to 50K terminals by using free mobility feature that ensuresconsistent user experience across wired and wireless networks4. CloudEngine S12700E integrates hardware-based OAM/BFD to provide fast fault detection and location for various services such as Ethernet, IP, MPLS, and VxLAN

The CloudEngine 16800 MPUD switch does not have a built-in intelligent processing chip. According to the CloudEngine 16800 Series Data Center Switches Datasheet, CloudEngine 16800 MPUD switch has a built-in management chip that provides management and control functions, but not intelligent processing functions. The intelligent processing chip is embedded in the CloudEngine 16800 AI chip card (AI-NPU), which provides AI-powered network analysis and O&M capabilities.

AirEngine 6760R-51E is a Wi-Fi 6 AP designed for rail transit scenarios. It supports 8x8 MU-MIMO and eight spatial streams, achieving a rate of up to 5.95 Gbit/s2. AirEngine 6761-21T is a Wi-Fi 6 AP designed for indoor scenarios such as offices and classrooms. AirEngine 6760-X1E is a Wi-Fi 6 AP designed for indoor scenarios such as hotels and shopping malls. AirEngine 6760-51EI is a Wi-Fi 6 AP designed for indoor scenarios such as stadiums and exhibition halls.

M-LAG (Multi-Chassis Link Aggregation Group) is the recommended networking mode for leaf switches. According to the Huawei CloudFabric Data Center Network Solution White Paper, M-LAG enables multiple leaf switches to form a logical device that provides high availability, load balancing, and simplified management.

NE8000 F1A has 36 1GE ports. According to the NetEngine 8000 F1A Service Router Datasheet3, NE8000 F1A supports flexible combinations of up to 56 ports, including 36 x GE, 16 x 10GE, 2 x 40GE, and 2 x 100GE ports.

Huawei ranked No.1 in the Wi-Fi 6 standard working group in the number of proposals. According to the Huawei AirEngine Wi-Fi 6 Solution White Paper, Huawei has submitted more than 240 proposals to the IEEE 802.11ax (Wi-Fi 6) standard working group, accounting for 15% of all proposals.

The large-packet throughput of the USG6530E is 3 Gbit/s. This is based on the performance test results of the USG6530E using 1500-byte packets