Pass the Huawei HCIA-VC H11-851_V3.0 Questions and answers with CertsForce

Both support H.323 and SIP protocols.

Both support full adaptation and full switching modes.

Both support secondary flow adaptation.

The C1oudMCU does not support automatic cascading with 9-series MCUs when holding data conferencing.

DVI

HDMI

VGA

S-video

When SMC3.0 schedules a recording and broadcasting conference, if there are no recording and broadcast resources in the main service area and the backup service area, the recording and

broadcasting meeting will not be held normally.

When there is only one service area, scheduling meetings use the Default service area directly by default, and you must require configuration matching rules to identify the service area.

When SMC3.0 schedules a recorded meeting, the media and recording resources in the main service area are used in preference.

When SMC3.0 schedules a recording and broadcasting conference, when the recording and broadcasting resources in the main service area are insufficient, the system will use the recording and

broadcasting resources in the corresponding backup service area to ensure the smooth convening of the meeting.

Local upgrade

USB flash drive upgrade

SMC Bulk Upgrade

Minimum System Upgrade

When scheduling an Adhoc meeting, you need to set the chairman password and the meeting activation password separately.

Adhoc conferencing is a way to activate a meeting and join a meeting on the terminal side.

Before you can use Adhoc Meetings, you need to create a new Adhoc Meeting Template.

Adhoc conferencing does not consume MCU resources when it is not activated.

Color bar test and audio video loopback test

Signaling diagnostics

One-click trace diagnostic

Sound test

Press and hold the button in the center of the Mic 500 disc for more than 10 seconds to turn the microphone on or off.

When multiple Hic 500s are cascaded, press the key in the center of one of the Mic 500 discs and the other Mic 500s cascaded on or off at the same time.

The microphone can be turned on or off via the remote control of the video conferencing terminal, Touch or Tob interface configuration.

Before the video conferencing terminal is used with a single Mic 500, the HD-VI interface of the video conferencing terminal needs to be connected to the interface marked "IN" of the Mic 500.

Click "Settings> Advanced Settings > Smart Sound Screen" to enable the Smart Sound Screen function, and you can adjust the pickup range of the Smart Sound Screen after enabling it. B. When the

smart

screen is turned on, Ideaub automatically blocks the sound inside the sound screen, and the remote attendees only hear the members outside the sound screen.

The pickup range of the smart sound screen is available in 2 selectable configurations, large and small.

When the smart screen is turned on, Idealhb automatically blocks the sound outside the sound screen, and the remote participants only hear the members inside the sound screen to avoid noisy

environmental interference.

2

4

6

8

True

False

Ride the wall

Load Balancing

backup

Dynamic Switching

No meeting time.

CU Insufficient resources.

The venue is not registered with GK.

The MCU IVR access number has changed.

TE10

Box600

TE20

Bar300

When the electrical port and the optical port are plugged in at the same time, the electric port is used preferentially.

The FE port and the GEO port are mutually backup, providing network port backup function.

GEO is a service network port that is used for signaling and media streaming communications in the MCU.

When the MCU is connected to the network, the network cable needs to be connected to the FE port.

True

False