1. Home
  2. HP
  3. HP Global Partner Learning
  4. HP3-C11
  5. HP Scanjet N9120 Questions and Answers

Pass the HP HP Global Partner Learning HP3-C11 Questions and answers with CertsForce

 HP Exams      Go to Exam Detail      Get Premium Access
Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions
Questions # 1:

Which circuit board assemblies is part of the N9120’s ADF assembly? (Select two.)

Options:
A.

ADF Motor Control Circuitry

B.

Control Panel

C.

Display Controller

D.

Ultrasonic Multi-pick detection

E.

USB Host Controller

Questions # 2:

Which steps are involved in replacing the Automatic Document Feeder on the HP Scanjet N9120? (Select three)

Options:
A.

Remove the System Power Supply

B.

Align ADF toFlatbed.

C.

Remove the Flatbed Scanner Glass

D.

Adjust ADF height

E.

Perform ADF alignment with the N9120 Service Tool

F.

Remove the ADF Hinge wedges

Questions # 3:

Which HP Scanjet N9120 NVRAM data should be downloaded prior to the first Customer site visit?

Options:
A.

Replacement Unit NVRAM data

B.

ADF Controller PCA Count Data

C.

Defective Unit NVRAM data

D.

ADF Height Alignment calibration values

Questions # 4:

Which task can be performed from the Repair tab in the HP Scan N9120 Service Tool?

Options:
A.

Repair the scanner’s NVRAMdata.

B.

Adjust the flatbed carriage return alignment.

C.

Calibrate the Imprinter Cartridge nozzle alignment.

D.

Align the BackgroundSolenoid.

Questions # 5:

Which software and drivers are included on the HP Scanjet N9120 Scanning Software CD? (Select three)

Options:
A.

Kodax Virtual Rescan Professional

B.

HP Smart Document Scan Software

C.

IRIS Read IRIS Pro

D.

ADF Sensors Utility

E.

EMC ISIS/TWAIN drivers

F.

Linux drivers

Questions # 6:

What is the base warranty offered with the HP Scanjet N9120?

Options:
A.

1-1-1

B.

2-1-1

C.

3-3-1

D.

3-3-3

Questions # 7:

Which steps should you take to confirm a successful drivers-only installation? (Select two.)

Options:
A.

Check that the scanner enumerates on the host computer when connected and powered on.

B.

Power Cycle the Scanner.

C.

Open and run some of the customer’s scanningsoftware.

D.

Install and run the HP Scanjet N9120 Service Tool.

E.

Download the current version of the ScannerFirmware.

Questions # 8:

What can you use to create scanning profiles for the N9120?

Options:
A.

the quick start buttons on the control panel

B.

HP Smart Document Scan Software

C.

the HP Scanner Tool Utility

D.

the HP Scanjet N9120 Service Tool

Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions