Pass the EMC Storage Administrator D-XTR-DY-A-24 Questions and answers with CertsForce

For a customer with an 80 TB database that will not benefit from compression and deduplication, and with no projected future growth, the minimum recommended XtremIO X1 offering would be the one that provides at least 80 TB of raw storage capacity.

Based on the options provided:

A. 20 TB 4 X-Brick model

B. 40 TB 4 X-Brick model

C. 10 TB 8 X-Brick model

D. 20 TB 6 X-Brick model

The most suitable option that meets the requirement of providing at least 80 TB of raw storage capacity would be B. 40 TB 4 X-Brick model. This is because each X-Brick in the XtremIO X1 system contributes to the total raw storage capacity, and with a 4 X-Brick model, each X-Brick would need to provide at least 20 TB to meet the 80 TB requirement. Since the 40 TB 4 X-Brick model offers 40 TB per X-Brick, it would exceed the required capacity, ensuring that the customer’s needs are met without any shortfall.

The XtremIO Management Server (XMS) requires DNS configuration to resolve Fully Qualified Domain Names (FQDN) used in ESRS (Electronic Support Services) configurations. If the DNS is not configured on the XMS, it will not be able to resolve the ESRS FQDN, leading to a failure in connecting home. Configuring DNS on the XMS ensures that all network addresses, including the ESRS server, can be resolved correctly.

References:

Dell XtremIO Deployment and Learning Course Materials

XtremIO X2 Configuration Guide

In XtremIO, snapshots are created efficiently using metadata rather than duplicating the actual data blocks. When a snapshot is made, it initially shares the same data blocks as its ancestor. When the first write occurs to a block in a snapshot, it triggers a Copy-On-First-Write (COFW) operation. This means the original data block is copied to a new location to preserve the integrity of the snapshot, ensuring that each snapshot reflects the data state at the moment of its creation.

This COFW operation ensures that the data remains consistent and unchanged for each snapshot, while allowing new writes to occur without impacting the original data or other snapshots. As a result, the first write to each snapshot impacts its ancestor by triggering a COFW operation.

References:

Dell XtremIO Deployment and Learning Course Materials

VMware Horizon environments with linked clones require optimal storage configurations for performance and management.

According to best practices, each datastore should handle a specific number of linked clones to avoid performance bottlenecks.

For 1000 linked clones, it is recommended to have a minimum of 6 datastores to distribute the load evenly and maintain optimal performance.

References:

Dell XtremIO Best Practices for VMware Horizon

VMware Horizon Architecture Guide

Understanding X-Bricks: X-Bricks are the fundamental building blocks of an XtremIO storage array. Each X-Brick consists of a pair of storage controllers and a set of SSDs.

XtremIO X1 Cluster Configuration:

An XtremIO X1 cluster can scale by adding more X-Bricks.

The scalability and configuration limits depend on the hardware and software capabilities of the XtremIO X1 system.

Maximum Number of X-Bricks:

The XtremIO X1 cluster can be configured with up to 4 X-Bricks.

This means the maximum configuration for an XtremIO X1 cluster would include 4 X-Bricks.

References:

Dell XtremIO X1 System Overview and Specifications

Dell XtremIO Deployment Services

Official XtremIO Documentation for hardware and cluster configuration limits.

 Click, Create/Modify Mapping

 Select the volume

 Select an Initiator group

 Assign a LUN number

 View/verify the results

Click, Create/Modify Mapping: Start by navigating to the section where you can create or modify mappings in the XtremIO WebUI.

Select the volume: Choose the volume you want to map to a host from the list of available volumes.

Select an Initiator group: Pick the appropriate initiator group, which represents the host or group of hosts to which the volume will be mapped.

Assign a LUN number: Assign a Logical Unit Number (LUN) to the volume, which the host will use to access it.

View/verify the results: Finally, review the mapping configuration to ensure that everything is set up correctly and verify that the host can access the mapped volume.

References:

Dell XtremIO User Guide

XtremIO WebUI Documentation

Dell XtremIO Deployment Services

Best practices for managing volumes and host mappings in XtremIO environments

After creating volumes on an XtremIO system, the steps required to provision these volumes to the servers involve host configuration, establishing SAN connectivity, setting up an Initiator group, and mapping the volumes.

Host Configuration: Configure the host’s HBA (Host Bus Adapter) to ensure it can connect to the SAN (Storage Area Network). This involves setting the correct parameters such as data transfer rates and queue depths.

SAN Connectivity: Establish connectivity between the host and the SAN. This includes zoning in a Fibre Channel network or setting up the appropriate network configurations for iSCSI.

Initiator Group: Create an Initiator group within the XtremIO system. This group will contain the identifiers (WWPN for Fibre Channel or IQN for iSCSI) of the host’s HBA.

Volumes Mapping: Map the volumes to the host by creating a LUN (Logical Unit Number) mapping that associates the volumes with the Initiator group. This allows the host to see and access the volumes.

These steps ensure that the XtremIO volumes are correctly provisioned and accessible to the servers1. It’s important to follow the specific procedures outlined in the official Dell XtremIO Deploy Achievement documentation to ensure proper configuration and to avoid any potential issues during the provisioning process.

For an XtremIO X2 two X-Brick system installation, only two IP addresses are required because the entire system is managed through the first X-Brick. This is in line with the design of the XtremIO X2 architecture, which allows for a single management point for multiple X-Bricks. The XMS (XtremIO Management Server) manages multiple XtremIO arrays and requires an IP address for each X-Brick in the cluster1. In a two X-Brick system, the first X-Brick acts as the primary management point, and the second X-Brick is managed through it, thus only necessitating two IP addresses for management purposes2.