Pre-Winter Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65

  1. Home
  2. EMC
  3. Storage Administrator
  4. D-PST-OE-23
  5. Dell PowerStore Operate 2023 Exam Questions and Answers

Pass the EMC Storage Administrator D-PST-OE-23 Questions and answers with CertsForce

 EMC Exams      Go to Exam Detail      Get Premium Access
Viewing page 3 out of 3 pages
Viewing questions 21-30 out of questions
Questions # 21:

What describes Dell PowerStore X front-end cabling?

Options:
A.

Uses internal VMware virtual switching and does not require a management network

B.

Storage and management use the same LACP bonded cable connection

C.

Uses VLTi data switch interconnectivity to support vMotion networks

D.

Management and discovery use the same cables and connections as storage

Expert Solution
Questions # 22:

Which formats are available to list alerts?

Options:
A.

Standard, NVP, CSV and JSON

B.

Table, XLS, CSV and JSON

C.

Table, NVP, CSV and XLS

D.

Table, NVP, CSV and JSON

Expert Solution
Questions # 23:

How is a service laptop IP configured to connect to the Service LAN port of a Dell PowerStore node?

Options:
A.

Static IP: 128.221.1.249 and netmask: 255.255.255.0

B.

Obtain IP address from DHCP on PowerStore

C.

Static IP: 169.254.1.249 and netmask: 255.0.0.0

D.

Leave IP address and netmask unconfigured

Expert Solution
Questions # 24:

What is achieved when the Rapid Spanning Tree Protocol (RSTP) is enabled on a Dell PowerStore network configuration?

Options:
A.

Redundant connectivity between data switches

B.

Communication between data switches and management switch on PowerStore T

C.

Management between appliance and vCenter on PowerStore X

D.

Fault tolerance between appliances in a PowerStore cluster

Expert Solution
Questions # 25:

While on-site installing a Dell PowerStore system, the node A and В embedded module fault LEDs are alternating blue and amber (blue for 3 seconds). What does this indicate?

Options:
A.

The system is booting

B.

Nodes are in service mode

C.

The system is not initialized

D.

Nodes are in degraded mode

Expert Solution
Questions # 26:

Which type of device is supported in expansion enclosures?

Options:
A.

NVMe SCM

B.

NVMe SSD

C.

NVMe NVRAM

D.

SAS SSD

Expert Solution
Questions # 27:

For what is the “svc_container_mgmt status CP” command used?

Options:
A.

Clears the Control Path audit log

B.

Resets the Data Path root access

C.

Checks the status of the Control Path

D.

Checks the status of the Data Path

Expert Solution
Questions # 28:

How can the PUHC health check results be viewed?

Options:
A.

By accessing the Swagger UI

B.

From syslog server

C.

In Details of Appliances and Nodes

D.

From management DB

Expert Solution
Viewing page 3 out of 3 pages
Viewing questions 21-30 out of questions