Pass the EMC Servers D-PEXE-IN-A-00 Questions and answers with CertsForce

Understanding Rail Locks:

The PowerEdge XE8640 server rails are equipped with a locking mechanism to secure the server during transport and installation. This prevents the server from moving unintentionally and ensures stability.

Identifying the Issue:

When the server stops after being pushed only a short distance into the rack, it is likely due to the rail lock engaging. This lock must be released to allow the server to slide fully into place.

Releasing the Rail Lock:

Locate the rail lock mechanism on the rails. This is typically a lever or button that, when pressed, releases the lock, allowing the server to slide further into the rack.

Detailed Steps:

Align the Server: Ensure that the server is properly aligned with the rails before proceeding. Misalignment can cause the server to get stuck or make it difficult to release the lock.

Press the Release Mechanism: With the server partially inserted, locate and press the release mechanism on both sides of the rails. This should disengage the locks.

Slide the Server: Once the locks are released, carefully push the server into the rack until it is fully seated. Ensure that the server is evenly aligned to avoid binding or getting stuck.

Avoiding Forceful Methods:

Avoid using excessive force to push the server into the rack as it can cause damage to the server, rails, or rack. Additionally, pushing forcefully without releasing the rail lock can lead to misalignment and potential hardware issues.

Safety and Assistance:

Ensure the lift is stable and properly aligned with the rack to prevent movement. If needed, have an assistant stabilize the lift while performing the installation steps.

Reference to Official Documentation:

Refer to the Dell EMC PowerEdge XE8640 Installation and Service Manual for specific instructions and diagrams illustrating the rail lock mechanism and proper installation procedures.

References:

Dell EMC PowerEdge XE8640 Installation and Service Manual: This manual provides detailed guidelines on the proper use of rail kits and the mechanism for releasing rail locks during server installation.

Dell EMC Technical Specifications Guide: Offers comprehensive details on the hardware specifications and installation processes for Dell PowerEdge servers, including rail systems and locking mechanisms.

For a customer implementing PowerEdge XE9680 servers in a data center with heating and cooling limitations, the NVIDIA A100 GPUs are a suitable choice. Here’s a detailed explanation:

GPU Efficiency: The NVIDIA A100 GPUs are known for their energy efficiency, which is crucial in environments with heating and cooling constraints1.

Performance: These GPUs provide excellent performance for CGI production, supporting complex rendering tasks1.

Compatibility: The PowerEdge XE9680 supports a range of powerful GPUs, including the NVIDIA A100, which is designed for AI, machine learning, and high-performance computing tasks1.

Cooling Requirements: The NVIDIA A100 GPUs have a lower thermal design power (TDP) compared to the NVIDIA H100 GPUs, making them more suitable for data centers with limited cooling capabilities1.

By choosing NVIDIA A100 GPUs, the customer can ensure that their PowerEdge XE9680 servers will deliver the required performance for CGI production while adhering to the data center’s heating and cooling limitations.

Understanding Stab-in Rails:

Stab-in rails are designed to simplify the server installation process. These rails enable a quick and straightforward installation of the server into the rack.

Compatibility and Usage:

Stab-in rails are specifically designed for use in 4-post racks with square holes. This compatibility ensures stability and proper fitting within the rack structure.

Installation Process:

Before initiating the installation, verify that the rack is a 4-post, square hole type.

Position the stab-in rails to align with the square holes on the rack. Typically, stab-in rails have tabs that fit precisely into these square holes.

Mounting the Server:

Once the rails are securely attached to the rack, the server can be mounted. The design of the stab-in rails facilitates a smooth insertion of the server, ensuring it is securely held in place.

Ensuring Proper Fit:

After the server is mounted, check to ensure that it is level and securely attached. This step is crucial to prevent any movement or displacement that could occur due to vibrations or physical disturbances.

References:

Dell EMC PowerEdge XE9680 and XE8640 Installation and Service Manual: This manual provides detailed instructions on the use and installation of stab-in rails, including compatibility with specific rack types.

Dell EMC Technical Specifications Guide: Offers comprehensive specifications and compatibility information for different mounting and installation hardware used with Dell PowerEdge servers.

The PowerEdge XE9680 server supports a high level of network throughput, which is achieved through its PCIe risers and network PCI card capacity. Here’s the detailed information:

PCIe Slots: The PowerEdge XE9680 server supports up to 10 PCIe Gen5 slots1. These slots are used to install PCIe devices, including network cards, which are essential for achieving high network throughput.

Riser Cards: Riser cards are used in servers to extend the PCIe slots and make them more accessible for installing additional cards, such as network cards.

Network Card Support: Each riser can support multiple PCIe network cards, allowing for expansion and increased network throughput.

Configuration: For the greatest amount of network throughput, the server can be configured with four risers, and each riser can accommodate two PCIe network cards1. This configuration maximizes the number of network cards and, consequently, the network throughput capability of the server.

By utilizing the full capacity of PCIe slots with the appropriate risers and network cards, the PowerEdge XE9680 can meet the customer’s requirement for the highest network throughput possible.