Spring Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: simple70

  1. Home
  2. Discussions
  3. NVIDIA
  4. NVIDIA-Certified Professional
  5. NCP-AII Discussions
  6. NCP-AII Exam Topic 2 Question 16 Discussion

NVIDIA AI Infrastructure NCP-AII Question # 16 Topic 2 Discussion

 NVIDIA Discussions      Browse All Questions      Go to Exam Detail      Get Premium Access
 Previous
Next  

NVIDIA AI Infrastructure NCP-AII Question # 16 Topic 2 Discussion

NCP-AII Exam Topic 2 Question 16 Discussion:
Question #: 16
Topic #: 2

You are a network administrator responsible for configuring an East-West (E/W) Spectrum-X fabric using SuperNIC. The Bluefield-3 devices in your network should be set to NIC mode with RoCE enabled to optimize data flow between servers. You have access to the Spectrum-X management tools and the necessary documentation. You need to use specific configuration commands to achieve this setup. Which of the following steps and commands are necessary to configure the Bluefield-3 devices in NIC mode for the E/W Spectrum-X fabric using SuperNIC? (Pick the 2 correct responses below)
A.

Use the command sudo mlxconfig -d /dev/mst/ set LINK_TYPE_P1=2 to enable Ethernet on the Bluefield-3 devices.

B.

Use the command sudo mlxconfig -d /dev/mst/ set DISABLE_SPECTRUM_X=1 to reduce overhead.

C.

Use the command sudo mlxconfig -d /dev/mst/ set INTERNAL_CPU_OFFLOAD_ENGINE=1 to configure the SuperNIC to operate in NIC mode.

D.

Use the command sudo mlxconfig -d /dev/mst/ set DPU_MODE=1 to set up the Bluefield-3 devices in DPU mode.

Get Premium NCP-AII Questions
Actual exam question for NVIDIA NCP-AII exam by Axel91722 at Mar 2, 2026, 1:11:24 PM

Contribute your Thoughts:


Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.

Submit
 Previous
Next