The NVIDIA System Management (NVSM) tool is the definitive CLI utility for monitoring the health of DGX platforms. While replacing a PSU (Power Supply Unit) is a common maintenance task, verifying that the new component is correctly integrated into the system’s health model is mandatory. While nvsm show power would provide specific data regarding wattage and voltage for the PSU, the most comprehensive way to ensure the replacement hasn ' t caused secondary issues or that the system hasn ' t remained in a " Degraded " state is to run nvsm show health. This command performs a global check across all subsystems: GPUs, NVLink switches, storage, fans, and power. If the PSU replacement was successful and the system is back to full redundancy, nvsm show health will return a " Healthy " status. In an AI factory setting, where DGX H100 nodes pull significant power, ensuring that all 6 PSUs (in an N+N or N+1 configuration) are not only physically green but logically acknowledged by the Baseboard Management Controller (BMC) is critical for preventing unexpected shutdowns during high-load training iterations.