The Nutanix ECA course provides detailed procedures for performing hardware upgrades, such as adding host memory, to ensure cluster stability and data availability. Upgrading host memory requires safely preparing the node to avoid disrupting running VMs or cluster operations.

Extract from Nutanix Enterprise Cloud Administration (ECA) Course Documents:

Module: Cluster Management, Section: Hardware Upgrades"Before performing hardware upgrades, such as adding host memory, the node must be placed into maintenance mode. This ensures that all VMs are migrated to other nodes and the host is safely isolated from cluster operations."

Module: Host Maintenance, Section: Maintenance Mode"Placing a node into maintenance mode is the first step for hardware upgrades. Maintenance mode migrates all VMs to other nodes, stops the Controller VM (CVM), and prepares the host for safe shutdown or hardware changes."

Explanation of Options:

A. Gracefully stop the host by using the out of band management interfaceThis is incorrect. Stopping the host via the out-of-band management interface (e.g., IPMI or iLO) without first entering maintenance mode risks disrupting running VMs and cluster services. The ECA course warns:"Shutting down a host without maintenance mode can cause VM crashes and data unavailability, as VMs are not migrated."

B. Remove node from the clusterThis is incorrect. Removing a node from the cluster is a permanent action that detaches it from the cluster’s metadata and storage pool, requiring re-imaging to rejoin. It is not appropriate for a temporary hardware upgrade like adding memory. The ECA course states:"Removing a node is not required for hardware upgrades and should be avoided, as it disrupts cluster configuration."

C. Execute "shutdown -h now" from the AHV command line interfaceThis is incorrect. Running shutdown -h now on the AHV host without entering maintenance mode will abruptly stop the host, potentially crashing VMs and disrupting cluster operations. The ECA course notes:"Directly shutting down a host via CLI without maintenance mode risks data loss and service disruption."

D. Place node into maintenance modeThis is the correct answer. Placing the node into maintenance mode is the first step for hardware upgrades, as it safely migrates all VMs to other nodes, stops the CVM, and prepares the host for shutdown or hardware changes. The ECA course emphasizes that maintenance mode ensures cluster stability during upgrades.

Supporting Extract:"To upgrade host memory, place the node into maintenance mode using Prism Element or the CLI command ncli host maintenance_mode. This ensures safe VM migration and host isolation."

Additional Context from ECA:

Maintenance Mode Process: In Prism Element, maintenance mode can be enabled underHardware > Host > Enter Maintenance Mode. The process automatically migrates VMs using live migration, stops the CVM, and isolates the host. For AHV, the CLI command is ncli host maintenance_mode id= enable=true.

Memory Upgrade: After entering maintenance mode, the host can be safely powered off to add memory, then powered back on and exited from maintenance mode.

Supporting Reference from Web Results:

The Nutanix Bible (https://www.nutanix.com/go/the-nutanix-bible) confirms: "Maintenance mode is the required first step for host hardware upgrades, ensuring VMs are migrated and the node is isolated before changes like memory upgrades."