Comprehensive and Detailed Explanation
The NetApp NS224 is an NVMe-based disk shelf that connects to supported AFF controllers through Ethernet-based NVMe storage connectivity using RDMA over Converged Ethernet (RoCE).
To establish redundant storage connectivity, the HA pair must have appropriate RoCE-capable ports configured for storage use.
Some NetApp platforms provide Ethernet ports that can operate in either network mode or storage mode. If an applicable port remains configured for network traffic, ONTAP cannot use that port for the intended NVMe shelf connection.
Consequently, a shelf may appear with insufficient storage path redundancy even when all physical cables are correctly connected.
NetApp's official NS224 documentation explicitly requires non-dedicated RoCE-capable ports to be configured for storage use. For ONTAP 9.8 and later, the documented command is:
NetApp Documentation
storage port modify -node < node_name > -port < port_name > -mode storage
The administrator can verify the configuration using:
storage port show
Option A: iWARP adapters are not the required connectivity solution for NS224 shelves.
Option B: Additional RoCE-capable PCIe cards are necessary only when the system lacks sufficient supported ports.
Option C: Disk ownership assignment does not resolve a missing storage path.
Option D: Configuring the applicable ports for storage use directly addresses the problem.
Therefore, D is correct, assuming the installed RoCE-capable ports are supported and correctly cabled.
Official NetApp References / Study Guide Topics:
NetApp Support Engineer ONTAP — NetApp hardware: NS224 NVMe shelves, RoCE connectivity, storage port configuration, and multipath HA.
NetApp — Prepare Systems for NS224 Shelf Connectivity
NetApp ONTAP CLI — storage port modify
=========================
Submit