The Physical Uplink Shared Channel (PUSCH) and Physical Uplink Control Channel (PUCCH) support closed-loop transmit-power control in 5G NR.
Closed-loop power control enables the gNodeB to adjust UE transmission power dynamically according to radio-channel conditions, received signal quality, and interference-management requirements.
Option A — PUSCH: The PUSCH carries uplink user data and selected control information. Its transmit-power calculation combines configured open-loop parameters with closed-loop power adjustments communicated through Transmit Power Control (TPC) commands.
These adjustments help maintain reliable uplink reception while limiting unnecessary UE power consumption and inter-cell interference.
Option D — PUCCH: The PUCCH carries uplink control information, including HARQ acknowledgments, scheduling requests, and CSI reports. Its power-control procedure also incorporates TPC commands and the corresponding closed-loop adjustment state.
Option B — PRACH: PRACH uses a random-access transmit-power calculation and power-ramping mechanism. It does not use the conventional PUSCH/PUCCH closed-loop TPC procedure.
Option C — PBCH: PBCH is a downlink broadcast channel transmitted by the gNodeB, so UE uplink closed-loop power control does not apply.
Therefore, PUSCH and PUCCH are the correct selections.
Official Reference: 3GPP TS 38.213, Sections 7.1.1 and 7.2.1, PUSCH and PUCCH Transmit Power Control ; TS 38.321, Random Access Procedure .
Submit