In 5G NR, Radio Resource Control (RRC) measurement configuration enables the UE to evaluate serving and neighboring cells for mobility, beam management, and radio-resource optimization.
Option A — Cell frequency: The intended parameter identifies the carrier frequency associated with the target cell or measurement configuration. This information allows the UE to determine the applicable frequency resources.
Option C — SMTC: SSB Measurement Timing Configuration specifies when the UE should perform SSB-based measurements. It defines the measurement-window periodicity, timing offset, and duration.
Option D — SSB frequency: The SSB frequency identifies the frequency location of synchronization signals that the UE must detect and measure.
Option B — Serving cell offset: Serving-cell offsets are used in measurement-event evaluation and reporting criteria. They are not part of the target-identification fields described by the intended question.
The standardized NR MeasObjectNR information element explicitly includes ssbFrequency and smtc1 , but does not define a separate field literally named Cell frequency within that structure.
Therefore, A, C, and D represent the intended Huawei-oriented answer.
Official Reference: 3GPP TS 38.331, Section 6.3.2, MeasObjectNR Information Element ; Section 5.5, Measurements .
Technical warning / qualification: The exact measurement target IE referenced by the question is not identified. While C and D are directly supported by the NR measurement-object specification, option A requires confirmation against the intended Huawei signaling definition. The answer is provisional rather than fully verified.
Submit