Exact Extract — Partner Successful Practice: Service Consistency Applied to a Financial Project (PDF page 218)
The customer ' s configuration and construction standards were met. The construction period was fixed and were not changed. The use of the office network on the next day was not affected.
The same case study states that the cutover window started at 00:00 on Saturday night and lasted five hours.
Technical Deep Dive:
Major service-affecting operations must be performed within an approved maintenance window to minimize operational disruption, control implementation risks, and provide sufficient time for verification and service restoration.
Option D is the expected answer. It establishes customer approval as the primary requirement and specifies 00:00–06:00 as a recommended low-traffic maintenance window.
Operations such as service cutover, configuration modification, board replacement, software loading, and power-off reset can temporarily interrupt services or introduce configuration inconsistencies.
Therefore, a controlled implementation procedure should include an approved change request, impact assessment, maintenance plan, rollback procedure, communication plan, and post-operation verification.
Performing such activities during a period of lower business activity can reduce the consequences of an unexpected interruption. However, the actual maintenance window must account for customer requirements, network utilization, geographic service coverage, and product-specific restrictions.
Option A proposes a fixed time interval without establishing customer approval as the overriding requirement.
Option B uses ordinary business hours, during which service interruptions may have greater operational consequences.
Option C is incorrect because high-risk service operations must not be performed arbitrarily.
For critical infrastructure, the governing product documentation and customer-approved maintenance procedure take precedence over a general recommended window.
Verification qualification: D is also the published answer for this question in the H20-688 practice bank. The uploaded Huawei training PDF demonstrates a midnight cutover, but does not explicitly establish 00:00–06:00 as a universal prescribed interval. Consequently, the exact six-hour recommendation is not independently verified from this PDF.
Submit