Comprehensive and Detailed In-Depth Explanation:

Understanding OSPFv3 LSA Types

OSPFv3 uses different LSA types than OSPFv2, with some being similar in function:

Link-LSA (Type 8): Generated by every router on a link to advertise link-local IPv6 information.

Intra-Area-Prefix-LSA (Type 9): Advertises IPv6 prefixes within an area.

Network-LSA (Type 2): Generated only by the Designated Router (DR) to advertise information about all routers on a multi-access network.

Inter-Area-Prefix-LSA (Type 3): Advertises network prefixes between OSPF areas (generated by ABRs).

Route Distribution Analysis:

A. Inter-Area-Prefix-LSA (Type 3) ❌ (Incorrect)

Generated by an ABR to advertise prefixes between OSPF areas.

More than one ABR can generate this LSA.

❌ Not always generated by only one router.

B. Link-LSA (Type 8) ❌ (Incorrect)

Each router generates its own Link-LSA for each link it participates in.

This means multiple routers can generate this LSA.

❌ Not generated by only one router.

C. Network-LSA (Type 2) ✅ (Correct)

Generated ONLY by the Designated Router (DR) on a multi-access network (such as an Ethernet link).

Other routers do not generate this LSA, only the DR does.

✅ Correct answer: This LSA is generated by only one router (the DR).

D. Intra-Area-Prefix-LSA (Type 9) ❌ (Incorrect)

Generated by any router to advertise IPv6 prefixes within an area.

Multiple routers in an area can generate this LSA.

❌ Not generated by only one router.

Final Conclusion:

✅ C. Network-LSA (Type 2) is the correct answer because it is generated by only one router—the Designated Router (DR).

Thus, the correct answer is: C. Network-LSA.