Comprehensive and Detailed In-Depth Explanation:

Step 1: Identify the Primary Path

The shortest OSPF cost to 10.0.3.3/32 from R1 is through R5:

R1 → R5 (Cost 10) → R3 (Cost 10) = Total Cost 20

The primary outbound interface from R1 to R5 is GE0/0/1.

Step 2: Identify the Backup Path (OSPF IP FRR & ECMP)

OSPF IP Fast Reroute (FRR) provides a backup next-hop in case the primary link (R1 → R5) fails.

A feasible backup path must have a cost equal to or close to the primary path, but it must avoid the same failure point.

Alternative Path Calculation:

Path 1 (R1 → R2 → R3)

R1 → R2 (Cost 10), R2 → R3 (Cost 10) → Total Cost = 20 ✅

Uses interface GE0/0/2 on R1.

Path 2 (R1 → R4 → R3)

R1 → R4 (Cost 10), R4 → R3 (Cost 10) → Total Cost = 20 ✅

Uses interface GE0/0/3 on R1.

Final Decision on the Backup Interface

Since both paths R1 → R2 → R3 and R1 → R4 → R3 have equal costs, either can be used for backup.

However, R1 → R2 → R3 shares a direct cost path with R5, meaning it may not be preferred as a full FRR backup.

The best backup outbound interface in this scenario is GE0/0/3 (R1 → R4 → R3).

Final Answer: ✅ C (GE0/0/3)

References:

HCIP-Datacom-Advanced Routing & Switching Technology V1.0 – OSPF IP FRR (Fast Reroute) Mechanism

OSPF Equal-Cost Multi-Path (ECMP) and Backup Route Selection

OSPF Route Calculation and Best-Path Selection