AP transmit power directly affects the effective coverage area of a wireless radio. Increasing transmit power may extend signal coverage, but excessive power can also increase interference with neighboring APs operating on the same channel.
Co-channel interference occurs when multiple APs using an identical frequency channel operate within overlapping RF coverage areas. Because IEEE 802.11 uses a contention-based medium-access mechanism, these APs compete for the same available channel airtime.
Excessive overlap can increase channel utilization, reduce transmission opportunities, and degrade aggregate WLAN throughput.
Huawei recommends reducing AP transmit power when coverage requirements can still be satisfied. This limits unnecessary signal propagation beyond the intended service area and can improve spatial reuse of available radio channels.
However, transmit-power reduction must be performed carefully. Excessive reduction may create coverage holes, weaken signal levels at cell boundaries, and degrade roaming performance.
Huawei's radio calibration mechanism uses Transmit Power Control (TPC) to dynamically adjust transmit power according to RF conditions and coverage requirements.
Power optimization should therefore be coordinated with channel planning, AP placement, and validation of received signal strength throughout the coverage area.
Since the statement explicitly assumes that WLAN coverage remains adequate, reducing AP transmit power is an appropriate measure for limiting co-channel interference.
Therefore, the answer is TRUE.
Training Material reference: WLAN Planning Basics → Channel Design Rules, PDF p. 473; WLAN Radio Resource Management → Power Adjustment, p. 302.
────────────────────────────────────────────────────────
Submit