Channel bonding increases available transmission bandwidth by combining multiple non-overlapping channels into a wider operating channel.
Huawei explains that two adjacent 20 MHz channels form a 40 MHz channel. Wider channels can be constructed using contiguous blocks, whereas 80+80 MHz operation combines two non-contiguous 80 MHz segments.
Option B is incorrect. In 40 MHz+ operation, the secondary channel has a higher center frequency than the primary channel.
Option D is correct. For 40 MHz− operation, the primary channel's center frequency is higher than the secondary channel's.
Option C reflects the intended principle. Huawei states that any of the four constituent 20 MHz channels in an 80 MHz channel can serve as the primary channel. Similarly, any of the eight constituent 20 MHz channels in a 160 MHz channel can be selected.
However, this does not mean the controller necessarily chooses the primary channel randomly.
Option A is imprecise. The Training Material states that two or more adjacent non-overlapping channels may be bonded. Therefore, the assertion that exactly two adjacent channels form every contiguous bandwidth category is incomplete.
C and D are the intended selections, but C would be technically clearer if randomly selected were replaced with selected.
Training Material reference: WLAN Planning Basics → WLAN Capacity Design → Channel Bonding, PDF p. 372, course slide 41.
────────────────────────────────────────────────────────
Submit