According to the scenario, you have enabled system message logging (syslog) service on all the routers that are currently working in the network. If you want to store all the repots, important error and notification messages sent by the routers, you can store all of these in the buffer, console, syslog server, and tty lines. You can use buffer, if you want to store syslog messages for later analysis of the network. Buffer is the memory of the router. The syslog messages that you have stored in the buffer are later available for the network analysis until the router is rebooted. You can use console port of the routers to send syslog messages to the attached terminal. You can also use vty and tty lines to send syslog messages to the remote terminal. However, the messages send through the console, vty, and tty lines are not later available for network analysis. You can use syslog server to store all the reports, and important error and notification messages. It is the best option to store all these because it is easy to configure a syslog server and you can store a large volume of logs. Note: If you have configured to run an SNMP agent, the routers send all the reports, and important error and messages in the form of SNMP traps to an SNMP server. Using this you can store the reports and messages for a long period of time. Answer: A is incorrect. You cannot store syslog messages in the auxiliary line.