When push updates are failing on a FortiGate device behind a NAT device, the administrator should check:
A.That the override server IP address is set on FortiManager and the NAT device.
The override server IP should be configured to ensure that FortiManager uses the correct IP address that can traverse the NAT to reach the FortiGate device.
D.That the virtual IP address and correct ports are set on the NAT device.
The NAT device must have the correct virtual IP (VIP) configured to map the FortiGate's internal IP to an external address, along with the correct ports needed for communication.
Options B and C are incorrect because:
Bsuggests setting the external IP on the NAT device to DHCP, which is not relevant to solving the push update issue.
Cimplies configuring NAT device IP and ports on FortiManager, which is less likely needed compared to configuring the correct VIP and ports.
FortiManager References:
Refer to FortiManager 7.4 Administrator Guide: Device Management and NAT Configuration.
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit