When performing an indoor predictive site survey to make the WLAN planning and design cycle more efficient, what is a best practice for configuration of the simulated APs in the predictive modeling software?
A.
All simulated APs should be set to 20 MHz channels only.
B.
Always use the default 2.2 dBi omnidirectional antenna patterns for simulated APs.
C.
If dynamic RRM will be used, AP transmit power should be set to an estimated average level of the expected client devices, such as 25 mW.
D.
Defining custom AP and antenna patterns will yield more accurate prediction data than the pre-configured vendor AP/antenna combinations.
When conducting a predictive site survey, it's essential to configure the simulated APs to reflect the expected real-world conditions.If dynamic Radio Resource Management (RRM) will be utilized, setting the AP transmit power to an estimated average level that matches the expected client devices, such as 25 mW, ensures that the predictive model accurately represents the operational environment.This approach helps in designing a WLAN that provides optimal coverage and performance.
[Reference: CWDP-305 Official Study and Reference Guide, Chapter on Advanced Site Surveys, , ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit