A server is reporting a hard drive S.M.A.R.T. error. When a technician checks on the drive, however, it appears that all drives in the server are functioning normally. Which of the following is the reason for this issue?
A.
A S.M.A.R.T. error is a predictive failure notice. The drive will fail in the near future and should be replaced at the next earliest time possible
B.
A S.M.A.R.T. error is a write operation error. It has detected that the write sent to the drive was incorrectly formatted and has requested a retransmission of the write from the controller
C.
A S.M.A.R.T. error is simply a bad sector. The drive has marked the sector as bad and will continue to function properly
D.
A S.M.A.R.T. error is an ECC error. Due to error checking and correcting, the drive has corrected the missing bit and completed the write operation correctly.
A S.M.A.R.T. error is a predictive failure notice. The drive will fail in the near future and should be replaced at the next earliest time possible. S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a feature that monitors the health and performance of hard drives and alerts the user of any potential problems or failures. S.M.A.R.T. can detect various indicators of drive degradation, such as bad sectors, read/write errors, temperature, or spin-up time. If a S.M.A.R.T. error is reported, it means that the drive has exceeded a predefined threshold of acceptable operation and is likely to fail soon. The drive may still function normally for a while, but it is recommended to back up the data and replace the drive as soon as possible to avoid data loss or system downtime.
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit