A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?
A.
Configure a second WLC to support half of the APs in the deployment.
B.
Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
C.
Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
D.
Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.
Thirty-two VLANs for 300 users would be inefficient and costly to implement as separate SSIDs. Every SSID adds management-frame overhead, and a large number of SSIDs reduces the airtime that remains for data, so a design that broadcasts 32 WLANs, or that splits them between bands, is not efficient and also exceeds the WLAN limits of most deployments. The recommended approach is Identity-Based Networking. One SSID with 802.1X is configured, and Cisco ISE authenticates the user and returns the VLAN through RADIUS attributes according to the role or department in the authorization policy, with AAA override enabled on the WLAN or policy profile. The 32 VLANs are then assigned dynamically, and the number of SSIDs stays at one. A second controller adds hardware without solving the SSID problem, and AP groups with different VLANs add complexity and still depend on many WLANs. One SSID with ISE-based VLAN assignment is the efficient solution.
[Reference:Blueprint 6.4 (Implement Identity-Based Networking on different wireless architectures); Cisco Wireless Controller and ISE configuration guidance, AAA override., ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit