On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?
A FlexConnect AP can keep serving clients when its link to the controller is down, but if its own Ethernet uplink fails, clients that associate would have no path to any network. The Flex profile provides a safeguard for this situation: the fallback-radio-shut command shuts the radios when the Ethernet connection is not operational, so the AP stops accepting clients and they can move to a neighbouring AP that is still connected. On a Catalyst 9800 the command is entered under the Flex profile context, which is created with wireless profile flex followed by the profile name. The keyword sequence wireless flexconnect profile is not a valid context on this platform, and ethernet-fallback-enable is not a command in the Flex profile, so those variants cannot meet the requirement. The correct command set is therefore wireless profile flex [profile name] followed by fallback-radio-shut, and then end to leave configuration mode. After applying the profile, the show wireless profile flex detailed command confirms that the radios will be shut down whenever the wired uplink of the AP stops working.
[Reference:Blueprint 1.2.b (split tunneling and fault tolerance); Cisco Catalyst 9800 Series Software Configuration Guide, Flex profile fallback-radio-shut. Source key listed B; corrected to C (see appendix)., ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit