Pass the CompTIA A+ 220-1102 Questions and answers with CertsForce

The technician should adjust the firewall settings to resolve the issue of not being able to access an internal site at https://companyintranet.com:8888. The firewall settings control how the firewall filters and allows network traffic based on rules and policies. The firewall settings may be blocking or preventing the access to the internal site by mistake or by default, especially if the site uses a non-standard port number such as 8888. The technician should check and modify the firewall settings to allow the access to the internal site or its port number. Default gateway settings determine how a computer connects to other networks or the internet. Default gateway settings are not likely to cause the issue of not being able to access an internal site if the user can access the public internet. DHCP settings determine how a computer obtains its IP address and other network configuration parameters automatically from a DHCP server. DHCP settings are not likely to cause the issue of not being able to access an internal site if the user can access other network resources. IP address settings determine how a computer identifies itself and communicates with other devices on a network. IP address settings are not likely to cause the issue of not being able to access an internal site if the user can access other network resources. Antivirus settings control how the antivirus software scans and protects the computer from malware and threats. Antivirus settings are less likely to cause the issue of not being able to access an internal site than firewall settings, unless the antivirus software has its own firewall feature that may interfere with the network traffic. References: CompTIA A+ Core 2 (220-1002) Certification Exam Objectives Version 4.0, Domain 1.6

 Samba is a software suite that allows Linux servers and desktops to integrate with Windows Active Directory environments. Samba can act as a domain controller, a file server, a print server, or a client for Windows networks. Samba can also provide authentication and authorization services for Linux users and devices using Active Directory.

SMB stands for Server Message Block, which is a network file sharing protocol that allows applications on a computer to read and write to files and to request services from server programs in a computer network. SMB is a built-in protocol in Windows operating systems and can be used to transfer files between computers over a network. The technician can use SMB to access a file share on the user’s workstation and copy the file to or from it. VPN stands for virtual private network, which is a technology that creates a secure and encrypted connection over a public network. VPN is not a built-in protocol in Windows operating systems and does not directly transfer files between computers. RMM stands for remote monitoring and management, which is a type of software solution that allows remote management and monitoring of devices and networks. RMM is not a built-in protocol in Windows operating systems and does not directly transfer files between computers. MSRA stands for Microsoft Remote Assistance, which is a feature that allows a user to invite another user to view or control their computer remotely. MSRA is not a protocol, but an application that uses Remote Desktop Protocol (RDP) to establish a connection. MSRA does not directly transfer files between computers.

https://www.pcmag.com/picks/the-best-desktop-workstations

Ransomware is a type of malware that encrypts the files on the victim’s computer and demands a ransom for their decryption. Ransomware can cause high disk throughput by encrypting large amounts of data in a short time.

The Windows 10 desktop has Windows 10 Home installed, which does not support RDP (Remote Desktop Protocol) as a host. Only Windows 10 Pro, Enterprise, and Education editions can act as RDP hosts and allow remote access to their desktops1. The Windows 10 desktop does not have DHCP configured, is connected via Wi-Fi, or is hibernating are not likely to prevent the RDP connection if the technician is able to ping the computer successfully.

Chromium is an operating system that only has a web browser interface. Chromium is an open-source project that provides the source code and framework for Chrome OS, which is a Linux-based operating system developed by Google. Chromium and Chrome OS are designed to run web applications and cloud services through the Chrome web browser, which is the only user interface available on the system. Chromium and Chrome OS are mainly used on devices such as Chromebooks, Chromeboxes and Chromebits. Linux is an operating system that does not only have a web browser interface but also a graphical user interface and a command-line interface. Linux is an open-source and customizable operating system that can run various applications and services on different devices and platforms. Linux can also support different web browsers, such as Firefox, Opera and Chromium. Microsoft Windows is an operating system that does not only have a web browser interface but also a graphical user interface and a command-line interface. Microsoft Windows is a proprietary and popular operating system that can run various applications and services on different devices and platforms. Microsoft Windows can also support different web browsers, such as Edge, Internet Explorer and Chrome. iOS is an operating system that does not only have a web browser interface but also a graphical user interface and a voice-based interface. iOS is a proprietary and mobile operating system developed by Apple that can run various applications and services on devices such as iPhone, iPad and iPod Touch. iOS can also support different web browsers, such as Safari, Firefox and Chrome. References: CompTIA A+ Core 2 (220-1002) Certification Exam Objectives Version 4.0, Domain 1.1

The next step that the technician should do before taking the computer off site for repair is to get authorization from the manager. Getting authorization from the manager is important because it ensures that the technician has permission and approval to remove the computer from the premises and perform the repair work off site. Getting authorization from the manager can also help document and communicate the reason and duration of the repair and avoid any misunderstanding or conflict with the user or the organization. Removing the HDD and then sending the computer for repair may not be feasible or necessary if the issue is not related to the HDD or if the HDD contains essential data or software for the repair. Checking corporate policies for guidance may be a good step but it does not replace getting authorization from the manager who is responsible for the computer and its data. Deleting the sensitive information before the computer leaves the building may not be possible or advisable if the issue prevents access to the data or if the data is needed for troubleshooting or recovery purposes. References: CompTIA A+ Core 2 (220-1002) Certification Exam Objectives Version 4.0, Domain 5.1

DHCP stands for Dynamic Host Configuration Protocol and it is used to assign IP addresses and other network configuration parameters to devices on a network automatically. This is useful for devices that do not require the same private address each time they connect to the internet. 

Incremental backup is a backup method that only backs up the files that have changed since the last backup, whether it was a full or an incremental backup. Incremental backup can save storage space and bandwidth, as it does not copy the same files over and over again. Incremental backup can also retain more versions of backups, as it only stores the changes made to the files. However, incremental backup can have longer restore times, as it requires restoring the last full backup and all the subsequent incremental backups in order to recover the data. The law firm is not concerned about restore times but asks the technician to retain more versions when possible, so incremental backup would be a suitable choice for them.

 The user can most likely make the change of extending the display to a second monitor in the System option in the Windows settings. The System option allows users to manage system settings and features, such as display, sound, notifications, power and storage. The user can extend the display to a second monitor by selecting Display from the System option and then choosing Extend these displays from the Multiple displays drop-down menu. This will allow the user to use both monitors as one large desktop area. Devices is an option in the Windows settings that allows users to add and manage devices connected to the computer, such as printers, scanners, mice and keyboards. Devices is not related to extending the display to a second monitor but to configuring device settings and preferences. Personalization is an option in the Windows settings that allows users to customize the appearance and behavior of their desktop, such as themes, colors, backgrounds, lock screen and screensaver. 

Rolling back video card drivers is the best way to resolve the issue of large desktop icons on a user’s newly issued PC. This means restoring the previous version of the drivers that were working fine before the software patch was deployed. The software patch may have caused compatibility issues or corrupted the drivers, resulting in display problems

The most likely reason that the system is not utilizing all the available RAM is that it is running a 32-bit OS. A 32-bit OS can only address up to 4GB of RAM, and some of that is reserved for hardware and system use1. Therefore, even if the technician installed 8GB of RAM, the system can only use around 3.5GB of usable RAM. To use the full 8GB of RAM, the technician would need to install a 64-bit OS, which can address much more memory2. The system missing updates, the system’s memory failing, or the system requiring BIOS updates are not likely to cause this issue.

VNC (Virtual Network Computing) is a protocol that allows a technician to simultaneously view and control a user’s screen remotely. VNC uses a server-client model, where the user’s computer runs a VNC server and the technician’s computer runs a VNC client. VNC can work across different platforms and operating systems3. SSH (Secure Shell) is a protocol that allows a technician to access a user’s command-line interface remotely, but not their graphical user interface. VPN (Virtual Private Network) is a technology that creates a secure and encrypted connection over a public network, but does not allow screen sharing. RDP (Remote Desktop Protocol) is a protocol that allows a technician to access a user’s desktop remotely, but not simultaneously with the user.

The script type that is used with the Python language by default is .py. .py is a file extension that indicates a Python script file that contains Python code that can be executed by a Python interpreter or compiler. Python is a high-level, general-purpose and interpreted programming language that can be used for various applications, such as web development, data analysis, machine learning and automation. .ps1 is a file extension that indicates a PowerShell script file that contains PowerShell code that can be executed by a PowerShell interpreter or compiler. PowerShell is a task-based, command-line and scripting language that can be used for system administration and automation on Windows systems. .vbs is a file extension that indicates a VBScript file that contains VBScript code that can be executed by a VBScript interpreter or compiler. VBScript is an Active Scripting language that can be used for web development and automation on Windows systems. .bat is a file extension that indicates a batch file that contains a series of commands that can be executed by a command-line interpreter or shell on Windows systems. Batch files can be used for system administration and automation on Windows systems. References: CompTIA A+ Core 2 (220-1002) Certification Exam Objectives Version 4.0, Domain 4.3

A S.M.A.R.T. error is a warning that a hard drive is about to fail or has failed. This means that the OS cannot be loaded from the drive and the user will see an error message indicating there is no OS found. The most likely cause of this issue is drive failure.