Pass the Cisco Cisco Specialist 648-238 Questions and answers with CertsForce

Viewing page 2 out of 5 pages
Viewing questions 11-20 out of questions
Questions # 11:

Which four camera configurations are valid? (Choose four.)

Options:

A.

CIVS-IPC-3530:1280x720 at 30 fps


B.

CIVS-IPC-3530:1280x800 at 30 fps


C.

CIVS-IPC-3530:1920x1080 at 5 fps


D.

CIVS-IPC-6030:1280x720 at 30 fps


E.

CIVS-IPC-6030:1280x800 at 30 fps


F.

CIVS-IPC-6030:1920x1080 at 15 fps


Expert Solution
Questions # 12:

Per Cisco best practices, how should you bulk upgrade the firmware of the multiple Cisco IP cameras that are deployed in a Cisco VSM system?

Options:

A.

via the web interface of each camera only


B.

via Cisco VSOM - System Settings - System


C.

via Cisco VSMC - Maintenance - Server Upgrade


D.

via Cisco VSMC - Maintenance - Manage Drivers


Expert Solution
Questions # 13:

Which Cisco Video Surveillance IP cameras can be configured as an indoor, vandal-resistant camera, without the use of a third-party external enclosure?

Options:

A.

CIVS-IPC-3520


B.

CIVS-IPC-3530


C.

CIVS-IPC-4500E


D.

CIVS-IPC-6000P


Expert Solution
Questions # 14:

Which four Cisco IP camera families natively support medianet? (Choose four.)

Options:

A.

Cisco 2900 Series IP Cameras


B.

Cisco 3000 Series IP Cameras


C.

Cisco 4000 Series IP Cameras


D.

Cisco 5000 Series IP Cameras


E.

Cisco 6000 Series IP Cameras


F.

Cisco 7000 Series IP Cameras


Expert Solution
Questions # 15:

Refer to the exhibit.

Question # 15

You are the system administrator for a newly deployed Cisco Video Surveillance solution. Branch A cameras are streaming to Cisco VSMS-A and Branch B cameras are streaming to Cisco VSMS-B. Cisco VSOM is reporting a "Timed out waiting for server response" error when trying to load video from camera 192.168.1.102, but network pings are being responded to from your workstation at HQ. All other cameras from the 192.168.1.0 network are working as expected. Which three options could have caused the error message? (Choose three.)

Options:

A.

There is a network configuration issue with the switch and switch port that camera 192.168.1.102 is connected to.


B.

Media server 192.168.1.10 is down and not responding.


C.

The Branch A and HQ routers are updating their routing tables and they have not yet converged.


D.

There is an IP address conflict on the 192.168.1.0 network.


E.

The password on the camera was changed.


Expert Solution
Questions # 16:

What is the advantage of using multicast instead of unicast to transport the camera video stream in the Cisco Video Surveillance solution?

Options:

A.

When the video stream is viewed on multiple operator workstations, the network is taxed only with single multicast stream.


B.

Multicast configuration on switching and routing infrastructure is less complex than the configuration for unicast traffic.


C.

You can configure one camera to stream to two media servers at the same time, for data redundancy purposes.


D.

Multicast is not supported in the Cisco Video Surveillance solution.


Expert Solution
Questions # 17:

Which three statements about the Cisco 4- and 8-channel standalone encoder are true?

Options:

A.

They both support dual streaming on all ports.


B.

They both support motion detection.


C.

They both support simultaneous video and audio.


D.

They both support H.264 compression.


Expert Solution
Questions # 18:

Refer to the exhibit.

Question # 18

You have installed a Cisco 4500E IP camera to monitor the area of interest near the center of an outdoor courtyard area 24 hours a day. Which three actions help to focus in on the area of interest and improve overall image quality? (Choose three.)

Options:

A.

Use a wider angle lens to increase field of view.


B.

Enable Day/Night mode on the camera.


C.

Reposition the camera to minimize exposure of the sky.


D.

Avoid placing the camera near trees and other objects that could obstruct the view.


E.

Enable PTZ functionality to focus on the area of interest.


Expert Solution
Questions # 19:

When configuring the privilege level on a Cisco IP camera, which of the following is not a valid option?

Options:

A.

Administrator


B.

User


C.

Monitor


D.

Viewer


Expert Solution
Questions # 20:

Which Cisco IP Video Surveillance camera(s) allow for remote focus and zoom through the web interface of the camera?

Options:

A.

CIVS-IPC-2500 and CIVS-IPC-2600


B.

CIVS-IPC-2930


C.

CIVS-IPC-2621V


D.

CIVS-IPC-4500E


Expert Solution
Viewing page 2 out of 5 pages
Viewing questions 11-20 out of questions