Pass the Checkpoint CCSE R81 156-315.81 Questions and answers with CertsForce

According to the Check Point website, INSPECT Engine is the technology that extracts detailed information from packets and stores that information in state tables. INSPECT Engine is the core of Check Point’s Stateful Inspection technology, which enables Security Gateways to inspect traffic at multiple layers and enforce security policies. The other technologies are either not related or not specific enough. References: INSPECT Engine

 The file that contains the host address to be published, the MAC address that needs to be associated with the IP address, and the unique IP of the interface that responds to ARP request is $FWDIR/conf/local.arp. Local.arp is a configuration file that defines static ARP entries for hosts behind NAT devices. This file allows the Security Gateway to respond to ARP requests for NATed hosts with the correct MAC address, and to publish the NATed IP address instead of the real IP address. The other files are either not related or not valid. 

The process that handles connection from SmartConsole R81 is cpm. Cpm stands for Check Point Management, and it is the main process that runs on the Security Management Server and interacts with SmartConsole clients. Cpm is responsible for managing policies, objects, logs, tasks, and other management functions. The other processes are either obsolete or irrelevant for SmartConsole connection.

The NAT rules that are prioritized first are Manual/Pre-Automatic NAT. NAT stands for Network Address Translation, and it is a feature that allows Security Gateways to modify the source or destination IP addresses or ports of packets that pass through them. NAT rules are the rules that define how NAT is applied to traffic that matches certain criteria. There are three types of NAT rules: Manual/Pre-Automatic NAT, Automatic NAT, and Manual/Post-Automatic NAT. Manual/Pre-Automatic NAT rules are the rules that are manually created by administrators and placed before the automatic NAT rules in the rulebase. These rules have the highest priority and are processed first by the Security Gateway. Automatic NAT rules are the rules that are automatically generated by the Security Gateway based on the NAT properties of network objects. These rules have the second highest priority and are processed after the manual/pre-automatic NAT rules. Manual/Post-Automatic NAT rules are the rules that are manually created by administrators and placed after the automatic NAT rules in the rulebase. These rules have the lowest priority and are processed last by the Security Gateway. 

 The CLI command that compiles and installs a Security Policy on the target’s Security Gateways is fwm load. Fwm stands for FireWall Management, and it is a command that allows administrators to perform various management tasks on the Security Management Server or Multi-Domain Server. Fwm load takes two arguments: the name of the Security Policy and the name or IP address of the target Security Gateway or Gateway Cluster. For example:

[Expert@SMS]# fwm load Standard_Policy fw1

This command will compile and install the Standard_Policy on the Security Gateway named fw1. The other commands are either invalid or perform different functions.

One of the major features in R81 SmartConsole is concurrent administration. This feature allows multiple administrators to work on the same Security Policy simultaneously, without blocking each other or creating conflicts. Concurrent administration improves the efficiency and productivity of security management operations1.

However, not all of the options given are possible considering that AdminA, AdminB and AdminC are editing the same Security Policy. The correct answer is B. AdminA and AdminB are editing the same rule at the same time. This is not possible because concurrent administration uses a locking mechanism to prevent multiple administrators from modifying the same rule or object at the same time. When an administrator clicks on a rule or an object, it becomes locked and a lock icon appears next to it. The lock icon shows the name of the administrator who is working on that rule or object, and prevents other administrators from editing it until it is unlocked12.

Therefore, the other options are possible considering that AdminA, AdminB and AdminC are editing the same Security Policy. Option A is possible because a lock icon shows that a rule or an object is locked and will be available when the administrator who locked it finishes working on it or logs out of SmartConsole12. Option C is possible because a lock icon next to a rule informs that any administrator is working on this particular rule, and hovering over the lock icon will show the name of that administrator12. Option D is possible because AdminA, AdminB and AdminC are editing three different rules at the same time, which does not create any conflicts or blockages12.

Threat Extraction is a software blade that always delivers a file to user. Threat Extraction removes or sanitizes the active content from the files and converts them to PDF format, which is safer and more compatible. Threat Extraction can also work together with Threat Emulation to provide both clean and original files to the users. Threat Extraction works on MS Office, PDF, and archive files, but not on executables. Threat Extraction can take up to 3 minutes to complete, depending on the file size and complexity. References: Check Point Security Expert R81 Course, Threat Extraction Administration Guide

ClusterXL supports Dynamic Routing for both Unicast and Multicast traffic. Dynamic Routing protocols, such as OSPF, BGP, or PIM, can be configured on cluster members to exchange routing information with other routers. ClusterXL supports two modes of operation for Dynamic Routing: New Mode and Legacy Mode. References: ClusterXL Administration Guide, SK98226 - ClusterXL New Mode Overview

The blades of Threat Prevention in Check Point include:

Intrusion Prevention System (IPS)

AntiVirus

AntiBot

SandBlast Threat Emulation/Extraction

So, the correct answer is D, which includes all the mentioned blades.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

 The correct command to add an “emailserver1” host with IP address 10.50.23.90 using GAiA management CLI is mgmt: add host name emailserver1 ip-address 10.50.23.90. This command will create a new host object in the Security Management Server database, with the specified name and IP address. The mgmt: prefix indicates that the command is executed on the Security Management Server, and not on the local GAiA machine. The other commands are either missing the mgmt: prefix, or have incorrect syntax or parameters. 

Threat Extraction is a software blade that delivers PDF versions of original files with active content removed. Active content, such as macros, scripts, or embedded objects, can be used by attackers to deliver malware or exploit vulnerabilities. Threat Extraction removes or sanitizes the active content from the files and converts them to PDF format, which is safer and more compatible. Threat Extraction can also work together with Threat Emulation to provide both clean and original files to the users. References: Check Point Security Expert R81 Course, Threat Extraction Administration Guide

To use SmartConsole R81 for managing SmartEvent R81, you need to have the following ports open:

Port 19009 for communication over HTTPS (443)

Port 19009 for communication over HTTP (80)

These ports are necessary for the SmartConsole to communicate with SmartEvent for management and monitoring purposes.

References: Check Point Certified Security Expert R81 documentation and learning resources.

Capsule Connect is a full layer 3 VPN client that provides secure and seamless remote access to corporate networks from iOS and Android devices. It supports all VPN authentication methods, such as certificates, passwords, tokens, and challenge-response. It also supports split tunneling and seamless roaming. References: Capsule Connect Datasheet, Capsule Connect Administration Guide

Dynamic Dispatch is a feature that enhances CoreXL performance by dynamically assigning new connections to CoreXL FW instances based on their CPU utilization1. To enable Dynamic Dispatch on Security Gateway without enabling Firewall Priority Queues (FPQ), you need to run the command fw ctl multik set_mode 4 in Expert mode and reboot2. This command will set the CoreXL mode to Dynamic Dispatcher without FPQ. The other options are not correct because:

A. fw ctl Dyn_Dispatch on: This command does not exist and will return an error message.

B. fw ctl Dyn_Dispatch enable: This command does not exist and will return an error message.

D. fw ctl multik set_mode 1: This command will set the CoreXL mode to Static Dispatcher without FPQ, which is the default mode2. This mode will use a static hash function to assign new connections to CoreXL FW instances based on their IP addresses and protocol.

References: CoreXL Dynamic Dispatcher, To fully enable Dynamic Dispatcher on a Security Gateway, Running Dynamic Dispatch / Dynamic Split / Dynamic Balancing on VSEC/IaaS in Vmware, Dynamic Balancing for CoreXL

Threat Emulation is a software blade that takes minutes to complete (less than 3 minutes). Threat Emulation analyzes files for malicious behavior by running them in a virtual sandbox. Threat Emulation works on MS Office, PDF, executables, and archive files. Threat Emulation does not always deliver a file, but only if no threats are found or if the user chooses to download the original file after seeing a warning message. References: Check Point Security Expert R81 Course, Threat Emulation Administration Guide